taeb Posted March 24, 2023 Report Share Posted March 24, 2023 Thank you for adding this device. I just tested it. Most of the commands work well. "Toggle Mute" mutes the amp. By clicking the button the 2nd time nothing happens. I assigned "Mute on" an "Mute off" to the mute button. This muted the amp for a moment end then unmuted it. Is there another solution? Here https://techsupport.cambridgeaudio.com/hc/en-us/articles/360000271837-EDGE-A-RS232-Codes you can find on page 3 the different sources you can activate on this amp. To set up an activity in SkipApp it is needed to define the source so the amp knows, what to play. Can you please add the sources to the commands of EDGE A? Thank you Quote Link to comment Share on other sites More sharing options...
taeb Posted March 24, 2023 Author Report Share Posted March 24, 2023 I just tested all commands with my device. Many work :-) As said before: "Toggle Mute" mutes the amp. By clicking the button the 2nd time nothing happens. I assigned "Mute on" an "Mute off" to the mute button. This muted the amp for a moment end then unmuted it. Not fully working: Input Next / Input Previous. Both commands select the next / previous input, but it works only once. The input selector is a row, so "Input next" should select the next input clockwise and "Input previous" should select the next input anticlockwise, both with no limitation. Quote Link to comment Share on other sites More sharing options...
jason Posted March 24, 2023 Report Share Posted March 24, 2023 2 hours ago, taeb said: I just tested all commands with my device. Many work :-) As said before: "Toggle Mute" mutes the amp. By clicking the button the 2nd time nothing happens. I assigned "Mute on" an "Mute off" to the mute button. This muted the amp for a moment end then unmuted it. Not fully working: Input Next / Input Previous. Both commands select the next / previous input, but it works only once. The input selector is a row, so "Input next" should select the next input clockwise and "Input previous" should select the next input anticlockwise, both with no limitation. Can you share with me your json you are using? Quote Link to comment Share on other sites More sharing options...
taeb Posted March 25, 2023 Author Report Share Posted March 25, 2023 I use the one that is integrated in SkipApp, no changes Quote Link to comment Share on other sites More sharing options...
taeb Posted March 31, 2023 Author Report Share Posted March 31, 2023 On 3/24/2023 at 12:02 PM, taeb said: Thank you for adding this device. I just tested it. Most of the commands work well. "Toggle Mute" mutes the amp. By clicking the button the 2nd time nothing happens. I assigned "Mute on" an "Mute off" to the mute button. This muted the amp for a moment end then unmuted it. Is there another solution? Here https://techsupport.cambridgeaudio.com/hc/en-us/articles/360000271837-EDGE-A-RS232-Codes you can find on page 3 the different sources you can activate on this amp. To set up an activity in SkipApp it is needed to define the source so the amp knows, what to play. Can you please add the sources to the commands of EDGE A? Thank you Can you please add the different sources to the json of Cambridge Audio EDGE A and find a solution for the Toggle Mute command and: Not fully working: Input Next / Input Previous. Both commands select the next / previous input, but it works only once. The input selector is a row, so "Input next" should select the next input clockwise and "Input previous" should select the next input anticlockwise, both with no limitation. Quote Link to comment Share on other sites More sharing options...
taeb Posted April 14, 2023 Author Report Share Posted April 14, 2023 Hi Jason I know, you are working hard. Is that thread maybe forgotten? Could you please resume it, so I can use my Skip 1s? Quote Link to comment Share on other sites More sharing options...
taeb Posted May 30, 2023 Author Report Share Posted May 30, 2023 Hi there For more than 1 month I haven't heard from you. I can't use my remote, because code is missing for my Cambridge Audio EDGE A. That's annoying. Please complete the code. Thank you Quote Link to comment Share on other sites More sharing options...
Nathan Posted June 6, 2023 Report Share Posted June 6, 2023 On 5/30/2023 at 2:50 AM, taeb said: Hi there For more than 1 month I haven't heard from you. I can't use my remote, because code is missing for my Cambridge Audio EDGE A. That's annoying. Please complete the code. Thank you I'm adding this to a ticket so Jason can make sure he doesn't lose it. In the meantime, I'd suggest, since Mute and Un-Mute are different commands, to put them on different buttons, if you happen to have a free button near the bottom of the remote. Quote Link to comment Share on other sites More sharing options...
taeb Posted June 15, 2023 Author Report Share Posted June 15, 2023 Thank you, Nathan. Jason wrote, that he was in hospital. The original remote has 1 button for mute / unmute. Quote Link to comment Share on other sites More sharing options...
taeb Posted July 22, 2023 Author Report Share Posted July 22, 2023 Hi again Could find solutions for the code? Quote Link to comment Share on other sites More sharing options...
taeb Posted August 25, 2023 Author Report Share Posted August 25, 2023 Hi there My remote is near my Mac, because I hope I can use it soon after an update. Until now it's for months not possible to use it, because my amp can't be controlled with the Skip 1s. There are several commands missing. Whan can I hope to use my remote? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.