Jump to content
Flirc Forums

Can I use the Skip 1S as replacement for the Logitech Harmony HUB remote?


Recommended Posts

  • 4 months later...

Quick Answer

The Harmony Hub is primarily RF controlled. Direct control with the Skip is not supported possible.

Not Quick Answer

In theory, you can set up a Raspberry Pi with Home Assistant and a FLIRC as a translation layer between IR and IP control for the Harmony Hub. The FLIRC would receive the IR command from the Skip, triggering a Home Assistant action. The main challenges include potential latency from the translation process and the need to establish actions and connections. I haven't done it, but below are a couple of links to get you started if you want to try.

* Harmony Hub/Home Assistant Integration

* Controlling Home Assistant with an Old Remote

Edited by Benjamin Metzler
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...