jason

can you post your config?

You definitely have keys recorded: File->Clear Configuration to remove all the keys from the device. You have multiple buttons recorded, some of them are probably noise, so that's the problem. ⚡ flirc_util settings flirc_util version v1.2.2 [v1.2.2-38-g44ce387+] Firmware: v2.3 Settings: sleep detection: Disabled noise canceler: Disabled inter-key delay: 6 state: 0 builtin profiles: Enable Memory Info: keys recorded: 42 keys remaining: 127 memory used: 33% Recorded Keys: Index hash key ----- --------- --- 0 564BDB2D c 1 98A09CA6 i 2 569C9742 return 3 5A4ED8FB escape 4 D643DDA5 up 5 98A06C59 left 6 98317117 down 7 5A8E00CB right 8 18DF869B ' 9 98B9FA15 . 10 568F2D26 r 11 5A129B6C f 12 9817D1BC x 13 187DC197 space 14 654A801E up 15 493207AB up 16 90CD4E5 down 17 89E89C89 left 18 C70F5D7C backspace 19 6506D070 up 20 6D590996 up 21 6D9D5C48 down 22 6DE1ADEB left 23 6D9DBB52 right 24 6D9D39EC return 25 6D9DBBF2 backspace 26 CFBAA99 i 27 D3DDD74 p 28 4E257E98 space 29 8D2489D6 x 30 6D25E44A i 31 6DE1B1C7 p 32 6D9D3DC8 space 33 6D9D5E15 x 34 6DE19485 i 35 6D598B0B f 36 6D9DFF0A r 37 6D9DDAD0 backspace 38 6DE18A8F i 39 4D614687 [ 40 8C6051C5 ] 41 6D9D3FF5 c

Can you post your configuration?

Can you post your config?

You still have the cable? Could just be the location, not sure. Have a pic?

Thanks so much for posting that, for those that did not have success, please post which one's you've tried. I'd like to try them as well. I'm creating a faq with this information: https://flirc.zendesk.com/hc/en-us/articles/202443378

Anything different about your setup? Extension cable? Repeater? Have you enabled anything in advanced? Noise canceler, interkey delay? etc? Let me know.

The amazon fire tv remote is wifi. I need to buckle down and get some ir repeaters to play with. My latest issues should have resolved the issues, but without hardware, I can't be certain. If you get it through me or my store, I can give you a full refund if it doesn't work out. Sorry I don't have a better answer.

It's got to be the extension cable. You might need one that's shielded. Or better yet, lose it all together. If the computer is exposed and not inside a cabinet, the IR will still get to flirc.

Can you share a picture of your setup? Are you using a USB extension cable? What's this plugged into?

Keep your eye on the version, while it's upgrading, it should change to bootloader, and read 1.0, 1.1, 2.0, or 2.1. Let me know which one it is. But it only gets stuck after pressing a remote button? Is flirc inside a cabinet?

Head to the GUI, and hit force firmware upgrade again. When it's upgrading, can you tell me the firmware version that is shown at the bottom? The bootloader has a different version. When the key's get stuck, is it after you pressed something, or does it do it on it's own?

Please keep me posted. It's not entirely impossible that it was me, but I can say with confidence that the amount of flircs I've sold, this has never been a problem. I wrote all the software included in the GUI except libusb, which is open source. There isn't anything malicious in there. The only thing I can think of is if the mouse/keyboard accidentally got the flirc driver. Again, keep me posted, happy to do a team viewer session to work this out.

what's going on with the whole in your pc?

now go to advanced, and disable built in profiles

I have a couple bugs to fix, but I'll make the firmware update detection automatic

In the GUI, go to file->advanced. Then do force firmware upgrade. Try again after you're on the latest.

Ah, I didn't realize you were using windows. So does the GUI say flirc is detected? When you hit go, does it say, 'press a key to pair with 'x''?

That runs the application as root. How are you launching the GUI?

Try running the GUI as sudo.

It's in the following directory: /Applications/Flirc.app/Contents/Resources/ just do: cp /Applications/Flirc.app/Contents/Resources/libusb-1.0.* /usr/local/lib/

It's sensitive, anywhere that the light can bounce. Mine is behind my computer, behind my TV, never misses a press. http://flirc.tv/downloads You can pair it on everything: windows, linux, mac. I've fixed all the issues so it should work on all versions of windows and the mac (excluding PPC). Any distro on linux is supported, and the rasperry pi supports the commandline interface and xbmc plugin.

Anything with a USB port, Amazon Fire TV, xbox 360, playstation, computers, raspberry pi's, etc. Just do the pairing on a supported operating system and you can plug it into anyone of those with no additional software needed. It will work with your previously paired remote.

Force upgrade your firmware in the advanced. That should do it. If not, in advanced, disable built-in profiles.

this was just done by someone who wanted better integration on amazon. I have an action item to add this to the GUI. You can use the commandline app: flirc_util record_api 0 101