CartesianJohn Posted March 13 Report Posted March 13 (edited) I'm having issues with my first foray into Flirc... Windows 11, Flirc Gen 2, Skip 1s remote (the Skip 1s works flawlessly with TV and other IR devices, no issues there). I have the Flirc USB to go in an Nvidia Shield. Downloaded and installed Flirc USB software on PC. Plugged Flirc into PC USB port, recognised by software, updated firmware successfully. Flirc logs show nothing of interest (screenshot attached to show IR debugging enabled). I choose a controller Choose a button to map (or click go on minimalist), confirm the button starts flashing and says "Press the button to be paired with..." Press buttons on remote, nothing happens. I've tried multiple remotes, multiple USB ports, have clear line of sight between Flirc USB and remote, but no matter what I do the Flirc never seems to receive an IR signal. Edited March 13 by CartesianJohn Quote
jason Posted March 13 Report Posted March 13 17 hours ago, CartesianJohn said: I'm having issues with my first foray into Flirc... Windows 11, Flirc Gen 2, Skip 1s remote (the Skip 1s works flawlessly with TV and other IR devices, no issues there). I have the Flirc USB to go in an Nvidia Shield. Downloaded and installed Flirc USB software on PC. Plugged Flirc into PC USB port, recognised by software, updated firmware successfully. Flirc logs show nothing of interest (screenshot attached to show IR debugging enabled). I choose a controller Choose a button to map (or click go on minimalist), confirm the button starts flashing and says "Press the button to be paired with..." Press buttons on remote, nothing happens. I've tried multiple remotes, multiple USB ports, have clear line of sight between Flirc USB and remote, but no matter what I do the Flirc never seems to receive an IR signal. This is upsetting and I'm sorry to hear about it. Can we do a quick test. Close the GUI, and then fire up command prompt, and do the following: "C:\Program Files (x86)\Flirc\flirc util.exe" unit test What is the result? Quote
CartesianJohn Posted March 13 Author Report Posted March 13 1 hour ago, jason said: This is upsetting and I'm sorry to hear about it. Can we do a quick test. Close the GUI, and then fire up command prompt, and do the following: "C:\Program Files (x86)\Flirc\flirc util.exe" unit test What is the result? No drama, I'm a software dev and data engineer so "technical difficulties" aren't the end of the world :) c:\Program Files (x86)\Flirc>flirc_util.exe unit_test [E] lib/libflirc/firmware/fw_4.0.c fl_ver4_set_interrupt(369): timeout [E] lib/libflirc/firmware/fw_4.2.c _fl_unit_test(132): error recording test0 Flirc Not Okay Quote
jason Posted March 13 Report Posted March 13 36 minutes ago, CartesianJohn said: No drama, I'm a software dev and data engineer so "technical difficulties" aren't the end of the world :) c:\Program Files (x86)\Flirc>flirc_util.exe unit_test [E] lib/libflirc/firmware/fw_4.0.c fl_ver4_set_interrupt(369): timeout [E] lib/libflirc/firmware/fw_4.2.c _fl_unit_test(132): error recording test0 Flirc Not Okay Ah shit, that means it's not okay... Send me a message, I'll swap it out for you and get you a return label. Quote
CartesianJohn Posted March 13 Author Report Posted March 13 Appreciate the prompt response - sent you a DM :) Quote
YetiMan Posted 5 hours ago Report Posted 5 hours ago I am having the same issue as the OP, no response to IR from my brand new (from Amazon) Flirc USB 2nd gen. I have a Gen1 that I have been using for years, so I tried uploading an old config to the Gen2 and it seemed to work, but then became unresponsive after a couple of minutes. Now it seems to be completely dead. I forced a firmware upgrade via "Advanced" in the GUI and it downgraded the fw, still doesn't work. Here are the results of flirc_util.exe, first without the flirc connected to the PC, then with. Thank you for any help you can provide! C:\Program Files (x86)\Flirc>flirc_util.exe Version: flirc_util.release.v3.27.16 FW Version: v4.10.5 SKU: Flirc 2.0 [dori] Branch: release Config: release Hash: 0xF7261C8C C:\Program Files (x86)\Flirc>flirc_util.exe Version: flirc_util.release.v3.27.16 [E] lib/libtransport/transport.c _dev_send_cmd(225): Wrong response: 'dmesg_pkv' != 'versionx' [E] lib/libtransport/hid.c hid_recv_packet(223): Wrong report exp: 5 != 1 [E] lib/libtransport/hid.c hid_recv_packet(224): hidapi: Success [E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1 [E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout [E] lib/libtransport/hid.c hid_recv_packet(223): Wrong report exp: 1 != 5 [E] lib/libtransport/hid.c hid_recv_packet(224): hidapi: Success [E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1 [E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout FW Version: v4.10.5 [E] lib/libtransport/hid.c hid_recv_packet(223): Wrong report exp: 1 != 5 [E] lib/libtransport/hid.c hid_recv_packet(224): hidapi: Success [E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1 [E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout [E] lib/libflirc/firmware/fw_4.0.c fl_ver4_header_peek(50): invalid address you idiot not a valid image [E] lib/libtransport/hid.c hid_recv_packet(223): Wrong report exp: 5 != 1 [E] lib/libtransport/hid.c hid_recv_packet(224): hidapi: Success [E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1 [E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout [E] lib/libtransport/hid.c hid_recv_packet(223): Wrong report exp: 1 != 5 [E] lib/libtransport/hid.c hid_recv_packet(224): hidapi: Success [E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1 [E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout Hash: 0xF7261C8C Quote
CartesianJohn Posted 1 hour ago Author Report Posted 1 hour ago I got mine replaced by Amazon and the new one simply worked. Jason kindly offered to arrange a return/replacement but given I'm in the UK it was just quicker and easier to do an Amazon return. 1 Quote
YetiMan Posted 36 minutes ago Report Posted 36 minutes ago 1 hour ago, CartesianJohn said: I got mine replaced by Amazon and the new one simply worked. Jason kindly offered to arrange a return/replacement but given I'm in the UK it was just quicker and easier to do an Amazon return. Thanks! I thought since my symptoms were a bit different than yours that maybe Jason could offer an easy fix. He'll probably respond tomorrow and we'll see. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.