Jump to content
Flirc Forums
Xaan

Windows 10 - Flirc Disconnected

Recommended Posts

Xaan    0

Hi all,

 

Trying to get this setup on a new MSI Cubi running Windows 10 Home 64-bit and the software (2.0.0) only says the Flirc is disconnected. I have reinstalled the software several times, rebooted, tried all of the other USB ports (all 3.0), uninstalled the device and drivers, updated the driver manually, updated the driver to 3.0.7.0 via ZADIG, but no luck with anything.

Under Device Manger, both the flirc and the HID Keyboard Device show up without any issues, but the software just insists that it is not connected.

flirc_devices.thumb.JPG.b19cf2ba1d9b6ee7

I have another WIndows 10 laptop and the issue is exactly the same on that system as well. What can I do? 

flirc_disconnected.thumb.JPG.feabd8e5732

Share this post


Link to post
Share on other sites
jason    141

Let's set up a team viewer. It could be a mistake in the version 2.0.0 software that I'm unable to reproduce. But this was one of my biggest gripes with the original version. I'm a bit limited with the hardware, and the new version operates completely driverless. None of this bullshit. In fact, PM me. Help me try and uncover what's wrong with this so I can issue a software update, and I'll send you the new one on the house.

Share this post


Link to post
Share on other sites
gabe1475    0

I am still having issues.  With 2.0.1, I get an error message as soon as I run the program, says the program has stopped working.  Have tried fresh install, no change. 

Share this post


Link to post
Share on other sites
jason    141

I am still having issues.  With 2.0.1, I get an error message as soon as I run the program, says the program has stopped working.  Have tried fresh install, no change. 

can we set up a team viewer session? If not, at your convenience;

There is a flirc.ini in the installation directory.

Can you change all the false to true, then set the loglevel = 0 ---> loglevel=5

Then can you post the log?
 

Share this post


Link to post
Share on other sites
gaki    0

Im getting this too (i emailed your seperately but thought i should respond her in case to save time?).

I tried on win10 and win7 with the same results.

 

 

Faulting application name: Flirc.exe, version: 1.0.0.0, time stamp: 0x584cf595
Faulting module name: Flirc.exe, version: 1.0.0.0, time stamp: 0x584cf595
Exception code: 0xc0000005
Fault offset: 0x0002aa80
Faulting process id: 0x22c4
Faulting application start time: 0x01d253f4871d884e
Faulting application path: C:\Program Files (x86)\Flirc\Flirc.exe
Faulting module path: C:\Program Files (x86)\Flirc\Flirc.exe
Report Id: 01dfed9d-f491-401f-a972-d19f176bde7e
Faulting package full name: 
Faulting package-relative application ID: 
 
 
-System
  
-Provider
   Name]Application Error
  
-EventID1000
   Qualifiers]0
  
 Level2
  
 Task100
  
 Keywords0x80000000000000
  
-TimeCreated
   SystemTime]2016-12-11T21:21:26.457791500Z
  
 EventRecordID2888
  
 ChannelApplication
  
 ComputerSteel
  
 Security
-EventData
   Flirc.exe
   1.0.0.0
   584cf595
   Flirc.exe
   1.0.0.0
   584cf595
   c0000005
   0002aa80
   22c4
   01d253f4871d884e
   C:\Program Files (x86)\Flirc\Flirc.exe
   C:\Program Files (x86)\Flirc\Flirc.exe
   01dfed9d-f491-401f-a972-d19f176bde7e

Share this post


Link to post
Share on other sites
jason    141

Im getting this too (i emailed your seperately but thought i should respond her in case to save time?).

I tried on win10 and win7 with the same results.

 

 

Faulting application name: Flirc.exe, version: 1.0.0.0, time stamp: 0x584cf595
Faulting module name: Flirc.exe, version: 1.0.0.0, time stamp: 0x584cf595
Exception code: 0xc0000005
Fault offset: 0x0002aa80
Faulting process id: 0x22c4
Faulting application start time: 0x01d253f4871d884e
Faulting application path: C:\Program Files (x86)\Flirc\Flirc.exe
Faulting module path: C:\Program Files (x86)\Flirc\Flirc.exe
Report Id: 01dfed9d-f491-401f-a972-d19f176bde7e
Faulting package full name: 
Faulting package-relative application ID: 
 
 
-System
  
-Provider
   Name]Application Error
  
-EventID1000
   Qualifiers]0
  
 Level2
  
 Task100
  
 Keywords0x80000000000000
  
-TimeCreated
   SystemTime]2016-12-11T21:21:26.457791500Z
  
 EventRecordID2888
  
 ChannelApplication
  
 ComputerSteel
  
 Security
-EventData
   Flirc.exe
   1.0.0.0
   584cf595
   Flirc.exe
   1.0.0.0
   584cf595
   c0000005
   0002aa80
   22c4
   01d253f4871d884e
   C:\Program Files (x86)\Flirc\Flirc.exe
   C:\Program Files (x86)\Flirc\Flirc.exe
   01dfed9d-f491-401f-a972-d19f176bde7e

I believe you have the older one, correct? The issue reported above is definitely different. Long story short, I created another sku for a huge company who was looking to partner, and they ended up not moving forward. I repurposed that sku, but gave them a different USB Product ID in the process.

The new 2.0 software has a completely re-written driver model that handles all the device communication. I simply forgot to add the AZ product id when searching for the device. This is why some people have a 'disconnected' state when opening the GUI. There was a substantial amount out there. Completely forgot about it, was about a year and a half ago.

Share this post


Link to post
Share on other sites
gaki    0

I believe you have the older one, correct? The issue reported above is definitely different. Long story short, I created another sku for a huge company who was looking to partner, and they ended up not moving forward. I repurposed that sku, but gave them a different USB Product ID in the process.

The new 2.0 software has a completely re-written driver model that handles all the device communication. I simply forgot to add the AZ product id when searching for the device. This is why some people have a 'disconnected' state when opening the GUI. There was a substantial amount out there. Completely forgot about it, was about a year and a half ago.

Ah, gotcha!

Yes this from a bit ago.  Is there an older version of the GUI i can use?  (right now it crashes it if it's plugged in)

Share this post


Link to post
Share on other sites
Jimmyrobo    0

Im having same issue with newer metal flirc.   Maybe you can email me at jimmy.robicheaux@gmail.com to see if there is newer software to fix this?   Otherwise i have a $20 piece of hardware that does nothing

Share this post


Link to post
Share on other sites
jason    141

Im having same issue with newer metal flirc.   Maybe you can email me at jimmy.robicheaux@gmail.com to see if there is newer software to fix this?   Otherwise i have a $20 piece of hardware that does nothing

this is an old post and there should have been an update posted. This might be different. What's going on with yours? Does it just say disconnected all the time? Does it show up in device manager?

Share this post


Link to post
Share on other sites
Jimmyrobo    0

Disconnected all the time.  I uninstalled driver and tried to reinstall.  Same issue. 

 

Im trying to get harmony remote to work with 2017 shield 16 gb.  

Share this post


Link to post
Share on other sites
jason    141

Disconnected all the time.  I uninstalled driver and tried to reinstall.  Same issue. 

 

Im trying to get harmony remote to work with 2017 shield 16 gb.  

Try right clicking the app and running as administrator. 

If that doesn't work, go to the Installation directory, drag flirc.exe to the desktop along with flirc.ini. Open up the flirc.ini and change the 0->5 and all the 'false' words to 'true'.

A log should be put on your desktop after running the application. Post that log and I'll take a look.

Share this post


Link to post
Share on other sites
jason    141

Disconnected all the time.  I uninstalled driver and tried to reinstall.  Same issue. 

 

Im trying to get harmony remote to work with 2017 shield 16 gb.  

I've got another thing we can try if that didn't work. Hoping to hear back from you.

 

Share this post


Link to post
Share on other sites
jason    141
2 minutes ago, ExplodingSidewalk said:

Windows 10 Pro 64 bit

FLIRC GUI Disconnected / Disconnected (Not Responding)

Latest version of Flirc.exe as of 07/15/2017.  Flirc USB Version 2 (metal).

Thanks for your help

 

FLIRC_GUI_Screenshot_01.PNG

FLIRC_GUI_Screenshot_02.PNG

FLIRC_USB_Version2_Devices.PNG

flirc_log.txt

You need to remove the libusbk driver, it's only needed for the first generation. The second generation doesn't need any drivers.

Share this post


Link to post
Share on other sites

Metal FLIRC USB Version purchased from Amazon.com.

Completely removed all drivers and software FLIRC related from Windows 10 Pro 64 bit.

Plugged FLIRC USB into multiple USB ports no drivers needed per post.

Results:  SAME AS PREVIOUS

 

FLIRC_USB_Ver2_DeviceManger.PNG

Share this post


Link to post
Share on other sites
jason    141
Just now, ExplodingSidewalk said:

FLIRC Log File

flirc_log.7z

let's do a team viewer, let me know if you have time today.

 

Share this post


Link to post
Share on other sites
jason    141
22 minutes ago, ExplodingSidewalk said:

What do you need me to do?

Chris

 

Grab a copy of teamviewer, and pm me your session ID

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×