boykster Posted February 21, 2015 Report Share Posted February 21, 2015 Noob Flirc user here, but have lots of experience with IR distribution and computer control / decoding / etc. My main IR processing system uses a Slink-e from Nirvis (well dead company) via Xantech compatible gear, and I use Harmony 880 remotes in 7 rooms + a ProntoPro (TSU7000) in my home theater. The IR codes are a mix of oem codes for controlling normal gear, as well as some Xantech generic codes to control an Extron Matrix video switch. Anyway - was looking for an option to control my ATV via IR and started with the Vista MCE remote recommended on lots of forums - the Ortek VRC-1100 and the IRX it comes with. Worked OK for the most part, but when using the harmony remotes I had the double press issue seen by many for the nav keys. I used the built-in Harmony codes and didn't learn any IR. I was able to tune that out using the harmony software as described here for the rooms that have Harmony remotes. I also had minor issues with the menu key - sometimes it worked, and sometimes it didn't For the theater, I used one of the Harmony remotes to program the ProntoPro and immediately had the double click issue again. I tried all kinds of settings, relearning codes, etc. I decided to try Flirc to see if that could help. For ease of setup, since I'd already programmed all 7 harmony remotes with the Ortek codes, I decided to try those codes. Fired up the latest Flirc software I could find, updated the firmware, selected the FireTV profile and hit "Start". When I was done, I went into advanced settings and enabled the garbage filter. Powered off the FireTV and swapped over to the Flirc. Worked right off - Harmony didn't have any double clicks (didn't think it would) and all keys worked fine. Grabbed the Pronto and same story - the double presses were gone with no adjustments on the Pronto. Happy camper and it didn't require hours of reprogramming remotes! Quote Link to comment Share on other sites More sharing options...
jason Posted February 21, 2015 Report Share Posted February 21, 2015 Awesome, thank you so much for sharing, and I'm so glad you like the product. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.