nak0604 Posted March 12 Report Share Posted March 12 (edited) I have came across an issue with the remote. The enter button for the TV I have programed no longer works, every other single button works on the remote I can do everything but use the enter button. I have tried to downgrade the firmware to 4.12.10 but that just caused the updater to crash at 16% every time I tried. I had to take the batteries out to get it back into a DFU state. I flashed 4.12.11 Beta firmware that I was on and that worked fine. I also reset all the configurations on the remote to factory settings and set the remote back up. During setup I noticed that when I tested the buttons nothing worked. I procceded to configure the remote with known settings from before. Everything worked except the enter button for the remote. Even reinstalling the latest 0.9.69 Beta app and setting up the remote doesnt work. Edited March 12 by nak0604 Additional Troubleshooting was conducted Quote Link to comment Share on other sites More sharing options...
Nathan Posted March 13 Report Share Posted March 13 You have not said what device the enter button is supposed to work with, making it trick to start figuring out what's wrong. Just a guess, but on some TVs "Cursor Enter" is the correct button and should replace "Enter." Quote Link to comment Share on other sites More sharing options...
nak0604 Posted March 13 Author Report Share Posted March 13 (edited) I apologize, I was going to add all the specifics at the end and just posted it. The TV I have is a Vizio OLED 55-H1 just for the case of having all the information I do have a Bose Soundbar 500 (all the buttons work with the soundbar). The TV enter button is set to enter like it always has been since I first set the remote up and it’s been working ever since a week ago now. Edited March 14 by nak0604 Found exact model of tv Quote Link to comment Share on other sites More sharing options...
Nathan Posted March 16 Report Share Posted March 16 On 3/13/2023 at 12:52 PM, nak0604 said: I apologize, I was going to add all the specifics at the end and just posted it. The TV I have is a Vizio OLED 55-H1 just for the case of having all the information I do have a Bose Soundbar 500 (all the buttons work with the soundbar). The TV enter button is set to enter like it always has been since I first set the remote up and it’s been working ever since a week ago now. Can you try replacing the Enter button with the Cursor Enter button? I also have a Vizio and I had to do that. (Or if it's set to Cursor Enter, switch it to Enter.) There's a chance that a beta update changed the default enter button. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.