jason
-
Posts
4,021 -
Joined
-
Last visited
-
Days Won
258
Posts posted by jason
-
-
48 minutes ago, ulrick65 said:
So I decided it was time to upgrade to Windows 10 anyway...so I did. I get the same result on Windows 10 (except that once I installed the software, when I plugged in the Flirc it was recognized and drivers loaded right away)...works fine in the flirc GUI but does not send any keyboard commands to the OS.
Jason, I am unclear on what you mean by that last post? I have wireless Logitech Wave keyboard and mouse that are connected with a USB transmitter.
Yawor...I tried different ports, same result.
Let me know your thoughts please.
Thanks.
PM Me, I'll send you the new one. Not worth any one's trouble banging our heads against the wall.
-
that's correct. Just wanted to make sure. It's possible interface 0 has the driver, which is the keyboard. That would cause this. You'll have to remove it the driver on that one. Let me know if that's helpful.
-
Do you have the stainless steel version, or the plastic version?
-
2 hours ago, Ting said:
Hurray, it's working for me too. Thanks!!!
I've als updated the windows media center controller so it should be fully accurate for you guys to use: http://cl.flirc.io/kpNo
-
Thank you guys so much for being supportive and awesome. Really does mean a lot.
-
Thanks so much for the patience, means a lot. Pushed publicly as well.
-
Once again, thanks for the awesome feedaback. Sat down today and figured out all the issues.
- Bug that caused all other keys to stop working without modifiers.
- ctrl+f and ctrl+b - windows is so picky. I need to insert control, then 'f'. Then I need to release the 'f' then the control. All this is being done now.
This is probably the last one you'll test and the one that will be pushed publicly.
(Understood you are using nemo, they are identical, but for those who don't have the nemo sku, the dori is posted here too)
-
Okay, I've figured out the issue. Here is an update. I think I'm going to always sequence the modifiers by default. Don't see why not as I'm emulating a keyboard and no one can push them all at the same time.
Let me know if there are any issues. -
These are the current releases. I'll reproduce the issue you provided and issue a fix most likely by tomorrow.
-
Ah I'm out right now. I'll post old images for you when I get the girls in bed. Thanks for the explanation. This is actually really helpful
-
Ah I'm out right now. I'll post old images for you when I get the girls in bed. Thanks for the explanation. This is actually really helpful
-
5 minutes ago, Willie_Howell said:
I should have said I have the older Harmony one remote and can setup activities with the Flirc, but how would I choose which Flirc to use? Is there any identity to differentiate the two Flirc devices? Thanks for the reply. Willie.
The remote profile would select the correct flirc. Let's say you pair a panasonic tv profile with one flirc and a samsung profile with the other flirc. Each would respond accordingly.
-
On 5/29/2017 at 2:33 AM, Ting said:
Any update with the change? I just tried with version v2.3.8 and it's still having the same issue.
Sorry for the delay, took me a bit longer. I've got a working firmware image. I will have an advanced setting to enable/disable this. In this current version, it's enabled by default and can't be disabled. Please let me know if it's working okay. If you try to upload and get 'invalid sku' try the other image. I will update the GUI later to post more detail about the firmware, at this time, it's guess and check.
-
On 5/28/2017 at 1:13 PM, mikty said:
Thank You so much it works now. I was disapointed after bought this device but now its fine. But i have a last problem. I use an harmony remote,flirc v2 with the flick' s profile inside the harmony but the power off (To suspend) button don't seem to work. Is there a way or setting to suspend the pc ? Thanks
It wont light up once you've recorded it.I think just the standard keyboard keys will do that.
-
I'll buy this remote and try and figure out what's going on
-
3 minutes ago, revs said:
So far 5 wake ups from 5 attempts. Usually it failed after about 3.. so far so good! :)
Will continue to test this weekend.
I'm confident this was the issue. After seeing it, finding the problem, understanding it, I have extremely high confidence. This problem only exists for a small portion of users, and it follows windows as well. Blatant disregard to violate the USB spec. I owe you guys a second unit for your patience and help.
-
2
-
-
Thanks for the patience guys. We've got a beta image working, but it stops working ofter some time. There is likely a security check that happens periodically. We'll figure it out and I'll keep you guys posted.
-
I owe you guys the thank you. And endless amount of gratitude for your patience and support.
-
1
-
-
On 5/24/2017 at 6:14 PM, Montas said:
It's a very good news that you have reproduced the problem ;)
Now i'm sure you can do that.
Good work :)
Okay guys, I think I figured it out. I pushed an update, GUI version v2.3.8 which has new firmware in it. So confident, I made it public, however, this may in fact just fix @Montas system. But I'm fairly confident. Seems to be a windows only thing, they send a set remote wake up feature request down to the device, in which case I would send a stall/nack. Windows said, 'oh yeah, fuck you' and then disconnected me. I'm now returning OK. This is not a required feature, apparently windows 10 says it is. Please don't leave me hanging if it works, please report back here and let me know. This was both brutal in finding, repeating, and solving.
-
2
-
-
I just announced the new one at maker faire, it's in mass production now. The one on amazon is the original.
-
I've got the other system up and running @Montas suggested and I've reproduced it. I'm furiously trying to find a remedy and won't stop until I do.
-
2
-
-
2 hours ago, Montas said:
Ok, i can write you all settings or i can send you a TrueImage image with my exact system. I think it will be around 30-40GB. I have enough space in Google Drive but i need few days for imaging and upload.
Bios setting are default except "Wake from USB Keyboard/Remote" ENABLED
Tell me which you prefer.
PS: there's one problem...it's all in Italian language :) I could reinstall in English if you really really really need.
Bye
Got most of the hardware, will start assembling and installing windows tomorrow. Don't worry about uploading anything just yet. Let me see if I can reproduce this on my own first.
-
7 hours ago, Ting said:
I am having the same problem, CTRL+F and CTRL+B not working in windows media center. It works fine from the keyboard, but not through the mapped remote through the Flirc software.
I am using the latest Flirc usb (2nd generation), and Flirc software v2.3.7. Maybe the old issue came back? That is, it sends both keys simultaneously!?
I will push this next week, I promise. Code is in there, I just need to test a bit more. I'm very sorry for the delay.
-
Ordered all the components. Hopefully I can reproduce this on site. Expect an update about one week from today, everything arrives early next week. @Montas please send me all the details you can.
Windows 10 64 professional?
Any settings after a format?
Can you save your BIOS config and post here?
Send me a picture of all your peripherals, if possible.
What USB connectors is everything plugged into?
Did you install any software after a fresh install?
Any settings after fresh install?How do you put your computer to sleep/suspend?
How long does it take for sleep to cause this?
Is there any difference between putting the pc to sleep, waiting for hibernation, and just going to hibernation?I'll add more if I think of anything.
-
1
-
Flirc not found on Linux - experienced Linux user needs help...
in General Questions
Posted
Did you install via apt-get and try running as sudo