codlord Posted November 25, 2019 Report Share Posted November 25, 2019 I am using Flirc USB on Ubuntu and I can program it and it works (using a single Harmony remote) and only controlling Kodi. However, I am getting constant seemingly random IR signals, some of which seem to result in keypresses or control characters or something which really messes with the PC. You can't really use the PC with this going on. If I look at the device log and enable IR debugging then I can see all these signals being received but if I leave a cursor in an editor I don't get any visible keys or anything showing, it's very odd. I have tried the flirc on various USB ports, with/without USB extension cable. I have tried the flirc in different rooms, in cupboards, covering the Flirc completely so it cannot possible be seeing any IR signals. I have tried disabling all builtin profiles (I normally just have the kodi one enabled). I have read on here lots of (very old) problems like this but no real solution. Ubuntu 19.10 Flirc GUI v3.24.1 Firmware v4.7.0 An example log from just a few minutes: Mon Nov 25 2019 17:14:47 Flirc GUI Version v3.24.2 Operating System: Linux :e:6392 0,344,359,92,673,316 :e:304 0,196,371,453,197,287 :e:426 0,221,312,312,189,368 :e:3734 0,761,380,419,176,236 :e:2366 0,222,311,360,660,363 :e:1836 0,506,422,408,462,211 :e:1936 0,420,223,283,286,521,227,211 :e:2057 0,230,270,185,286,92 :e:7281 0,421,363,207,201,283 :e:13499 0,221,248,240,469,236 :e:8687 0,226,312,117,461,314,374,130 :e:3550 0,171,265,96,459,161,418,368 :e:1598 0,464,167,241,341,309 :e:724 0,646,176,291,439,292 :e:297 0,195,185,126,587,258,193,210 :e:1342 0,171,367,244,558,767 :e:306 0,527,1131,96,664,113 :e:1522 0,298,452,635,542,130 :e:2484 0,196,304,266,167,427 :e:2740 0,485,210,113,430,211 :e:2696 0,205,898,215,694,313 :e:1607 0,221,559,261,860,261 :e:1344 0,468,265,185,371,211 :e:807 0,850,168,435,231,262 :e:3967 0,484,287,206,341,389 :e:2344 0,446,168,571,214,343 :e:5699 0,298,430,636,358,237 :e:2669 0,459,278,236,852,130 :e:3950 0,553,214,143,431,211,219,444 :e:7096 0,472,227,417,275,516 :e:3617 0,222,800,159,499,236 :e:3523 0,196,232,210,834,288 :e:1171 0,273,231,398,316,261,219,444 :e:8861 0,200,741,266,418,210 :e:1762 0,493,252,164,486,211 :e:3784 0,222,464,211,427,312 :e:703 0,222,579,211,367,262 :e:2775 0,175,389,291,490,352 :e:5629 0,204,355,236,388,126,448,312 :e:1913 0,298,218,215,762,237 :e:1997 0,196,202,440,469,338,375,156 Quote Link to comment Share on other sites More sharing options...
jason Posted November 26, 2019 Report Share Posted November 26, 2019 Can you post your saved configuration? Quote Link to comment Share on other sites More sharing options...
codlord Posted November 26, 2019 Author Report Share Posted November 26, 2019 o.k. here it is. A bit more info - I am only trying to use the Flirc to control Kodi. The source remote is a Harmony and although I can program nearly every key I want successfully I cannot seem to program the Play or Pause buttons. I go to the Kodi layout in the GUI, click on Play, press the Play button on the remote and the GUI says "recorded successfully", but then pressing play on the remote does nothing in the GUI - the play button in the GUI does not respond. I tried erasing/re-programming loads of times and always the same. Like I said, every other key I programmed on the Kodi GUI works as I would expect. I tried clearing the config in the GUI and starting again but it's still the same. I also did some more testing and although the Flirc is receiving loads of random inputs, the only output I seem to get on the PC is the occasional "space". So if I leave the PC in an editor I get no other inputs or special characters other than several spaces. But that's enough to mess the PC up when you are working on it. Space does play/pause on Kodi of course, play/pause on my music player if that has focus, messes with other apps as well as imputing random spaces in editors or whatever. Thanks for any help! my_flirc_config Quote Link to comment Share on other sites More sharing options...
codlord Posted December 6, 2019 Author Report Share Posted December 6, 2019 Any update or help on this issue? I would love to get the FLIRC working. Thanks Quote Link to comment Share on other sites More sharing options...
jason Posted December 13, 2019 Report Share Posted December 13, 2019 Can you format your config and leave it formatted, then go to file->advanced, and disable all but the kodi? I see multiple space bars recorded, which means that you probably recorded a spurious signal and it paired with spacebar. I'm also unsure about why you need any keys recorded at all? The profile is pre-loaded in flirc, and you no longer need to record anything if you are using flirc + the logitech profile. Quote Link to comment Share on other sites More sharing options...
codlord Posted December 26, 2019 Author Report Share Posted December 26, 2019 For me the pause/play buttons did not work until I recorded them manually. I have no idea why. I worked around the problem by recording caps-lock as the play/pause key and using the kodi custom keymap addon to configure caps-lock to be the play/pause button instead of spacebar. That way even if I get spurious IR signals they will just cause a caps-lock press which does not affect the general day-to-day use of the PC. I tried many times to reset config and re-record and always had the same issue. Why don't you have an advanced feature in the GUI to see exactly what is recorded and the ability to delete keys etc? You say I had multiple spacebars recorded but of course I had no way to know that. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.