sleeps5 Posted March 17, 2018 Report Posted March 17, 2018 I can attest that these FLIRCs are great for use with KODI when, especially when you build your own HTPCs. I have two 1st gen FLIRCs, which I have been using a while. But, I replaced one of the computers with an NVIDIA shield, so one of the dongles has been gathering dust until I built an arcade computer and needed a dongle to control KODI while the arcade was not in use. Thought I'd refresh the firmware on one of the FLIRCs and install it, but I advise against this. If they work, I don't think you should upgrade the firmware. After I upgraded to v3.9? one of the dongles stopped working. The remote doesn't register any of the key presses. Could I get the BIN for Firmware v2.3.0? This is the firmware on the other FLIRC that is still working. I am using the DVD button on the remote assigned to code 004. Quote
jason Posted March 17, 2018 Report Posted March 17, 2018 it's possible the upgrade would need you to re-record your keys. Any chance you can go to file->advanced, load embedded firmware. When the bootloader comes up, what version does it read? Quote
sleeps5 Posted March 17, 2018 Author Report Posted March 17, 2018 "load embedded firmware" isn't available. GUI = v3.9.12 Firmware is v3.9.0 Quote
sleeps5 Posted March 17, 2018 Author Report Posted March 17, 2018 forced update and GUI said bootldr was 2.1.0 Quote
jason Posted March 17, 2018 Report Posted March 17, 2018 any chance you can try re-recording one of the keys? Quote
sleeps5 Posted March 17, 2018 Author Report Posted March 17, 2018 sure. tried the numbers and directional buttons under the kodi control settings. nothing happens. Quote
jason Posted March 17, 2018 Report Posted March 17, 2018 I can't make these public. I need to add some kind of identifying information to the binary. I'll PM you a copy. Quote
sleeps5 Posted March 17, 2018 Author Report Posted March 17, 2018 uploaded via the GUI. restarted the GUI. displayed the firmware = 2.4.0. the GUI recognized the remote presses (said the buttons were recorded), but when pressing the buttons, they don't turn green. started kodi and buttons didn't do anything. switched out with another FLIRC and remote worked. the other FLIRC is running 2.3.0 based on the GUI. THEN... i switched the dongle back to the one i had issues to verify the firmware and checked the buttons for shits and giggles... and it turned the buttons on the GUI green. logged into kodi and it seems to work. All's well at this time. not sure why switching the dongles around got it going, but i'm not going to complain further either. Quote
jason Posted March 17, 2018 Report Posted March 17, 2018 Very strange, keep an eye on it and keep me posted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.