clobber Posted July 4, 2016 Report Share Posted July 4, 2016 Hi,Using Harmony One to control Kodi running on Ubuntu 14.04 LTS. Almost everything works except the play and pause buttons. What I am doing:1) Open the FLIRC software.2) Choose Kodi3) Test various keys on the remote control. When I press various keys like the "back" button, the corresponding key lights up green in the software (good).4) When I press the pause or play keys on my remote, neither key lights up green in the tool.5) Attempt to program both of the play and pause keys. The tool reports that both keys are programmed. However, I then immediately press one of the keys and the tool does not recognize it (light up green). Likewise, the play and pause still do not work in Kodi.Am I missing something?thanks Quote Link to comment Share on other sites More sharing options...
jason Posted July 4, 2016 Report Share Posted July 4, 2016 Not all the keys are going to light up on the virtual keyboard. Not sure why that is. Very sorry for the confusion. They should still work, let me know. Quote Link to comment Share on other sites More sharing options...
clobber Posted July 4, 2016 Author Report Share Posted July 4, 2016 That is confusing.Okay, that being said the play and pause keys still dont work in kodi. I've also tried it in Plex Home Theater with the same behavior. Quote Link to comment Share on other sites More sharing options...
jason Posted July 4, 2016 Report Share Posted July 4, 2016 which play pause keys are you using? Try manually recording keyboard shortcuts as well. Controllers->keyboards and then probably 'p' or 'ctrl+p', etc. Quote Link to comment Share on other sites More sharing options...
clobber Posted July 4, 2016 Author Report Share Posted July 4, 2016 Switching to Keyboard and then reprogramming the keys worked. In Kodi, pause is the spacebar.Just to confirm something. When I open the software and choose Controllers->keyboards or Controllers->Kodi, is that actually changing the configuration of the device? Quote Link to comment Share on other sites More sharing options...
yawor Posted July 4, 2016 Report Share Posted July 4, 2016 (edited) No, it doesn't. Flirc only saves the mapping between remote's button code and selected keyboard key combination. The configuration is changed only when you either record a new key, remove old one, load saved configuration, clear configuration or change any of the advanced options.The Controllers in the Flirc GUI are just predefined keyboard key combinations and it doesn't matter if you for example record key "i" from keyboard controller or Info from Kodi controller to show information about show or movie in Kodi. Edited July 4, 2016 by yawor Quote Link to comment Share on other sites More sharing options...
clobber Posted July 4, 2016 Author Report Share Posted July 4, 2016 thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.