dharrah Posted July 9, 2016 Report Share Posted July 9, 2016 I am running Raspbian Jessie on a RPi 2 and have my Flirc device plugged in. This device works 100% fine under OpenElec as well as RasPlex. I've verified through /var/log/syslog that the device is recognized but I do see the following error:Jul 9 20:21:46 raspberrypi kernel: [ 453.014807] usb 1-1.4: new low-speed USB device number 7 using dwc_otg Jul 9 20:21:46 raspberrypi kernel: [ 453.129171] usb 1-1.4: New USB device found, idVendor=20a0, idProduct=0001 Jul 9 20:21:46 raspberrypi kernel: [ 453.129201] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 9 20:21:46 raspberrypi kernel: [ 453.129217] usb 1-1.4: Product: flirc Jul 9 20:21:46 raspberrypi kernel: [ 453.129233] usb 1-1.4: Manufacturer: flirc.tv Jul 9 20:21:46 raspberrypi kernel: [ 453.154323] input: flirc.tv flirc as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:20A0:0001.0004/input/input3 Jul 9 20:21:46 raspberrypi kernel: [ 453.206096] hid-generic 0003:20A0:0001.0004: input,hidraw0: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-3f980000.usb-1.4/input0 Jul 9 20:21:46 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4" Jul 9 20:21:46 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device If I navigate to the Flirc utility directory (../Downloads/release/rpi/flric_util) I am able to successfully verify settings, keys, and versions. I can even delete and record keys through this interface. However, when I push the same keys (programmed a remote key to '0' for testing), nothing happens. I can take the Flirc out of the RPi and plug it right into Windows, and the key press results in '0' on the screen.Any ideas? I've googled all I can and am not finding any solutions. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.