Search the Community
Showing results for tags 'disconnected'.
Found 6 results
Dear Sir/Madam, I have been using a FLIRC Gen 1 to enable an old universal remote to control Kodi on my Raspberry Pii for a number of years. I have just replaced my controller with a One For All Essence remote and need to reprogram the FLIRC keys, which I haven't needed to do for a long time. I have connected the Flirc to a Windows 10 Home pc but device manager showed it could not find the driver. I followed an older forum post to resolve (https://support.flirc.tv/hc/en-us/articles/200712548-Using-the-ZADIG-Utility) using ZADIG, which enabled me to install a working driver. However when I install the latest app it shows the FLIRC as being disconnected. I have tried on two different windows 10 PCs now and it is the same on both. Please can you assist? (NOTE: I'm not very techy so may need a more detail instructions or advise than most). Many thanks in advance.
FlircSE- Disconnected (W7)So I just bought a new Flirc Streacom Edition from Overclockers UK for my Streacom FC5 Evo case. AFAIK it is installed correctly, there is a constant blue light emitted from it when pc is powered on. I am running W7 64bit. However the flirc GUI says "Disconnected" & under Device Manager flirc is listed under Other Devices & has the yellow warning traingle beside it. This would suggest to me that the driver has not been installed correctly. I have tried uninstalling, deleting flirc folder & then reinstalling the flirc software a few times but no joy. The flirc website Streacom Edition page link to Support just says "Under Construction". Am I right in thinking there is only one download for Windows regardless of the device and that this include both the GUI software AND the driver? Or is there a specific download for the Streacom Edition that I cannot find? I have read other posts here re: W10 issues, but I am on W7. I am at a bit of a loss here- any suggestions?
Flirc DisconnectedI am unable to get the Flirc GUI to recognize the dongle on my HTPC. When I try to map the keys, the GUI asks me to "Please connect flirc" and displays the disconnected Flirc face. I have tried plugging Flirc into both USB 3 and USB 2 ports, but neither change the outcome. Flirc is recognized in the Device Manager, but a second (new) device under "Keyboards" does not appear when the dongle is plugged in (see first attached image); the HID Keyboard Device listed is that of my actual USB keyboard/mouse - not the Flirc. What's weird is that Flirc is recognized as an HID Keyboard Device in the "Devices and Printers" screen (see second attached image). I have also tried the zadig method (), which did not work for me, and finally tried running the application as Administrator, as someone else had suggested, but the GUI still asks me to connect the Flirc. Here are the specs for my HTPC: - Windows 7 Pro x64 - ASRock FM288M Extreme+ (Motherboard) - Flirc v1.2.7 I was able to plug in Flirc to another computer (Windows 7 Home Premium x64 and different motherboard) and it connected without any problems. I mapped the basic buttons on this second computer, plugged it into Computer 1 (my HTPC) and the device became unresponsive. Any help would be greatly appreciated!
FLIRC disconnected under Window 10
Markus Friede posted a topic in General QuestionsHi, Just bought the FLIRC. Tried to install it on Windows 10. The FLIRC shows up as Keyboard under the "Bluetooth and other devices". But it did not show up in the Device Manager. I had to use to Zadig to make it even appear there. But the Device Manager shows both flirc 0 and flirc 1 under "libusbK" Devices. I have also provided the log. States that the HID-device can not be found (AFAICS). Anyone knows what to do? Cheers, Markus flirc_log.txt
Hi all I have a Flirc SE (for the Streacom cases). On my current OS installation I can't get the Flirc GUI to recognize the Flirc board as connected. It always says "disconnected :(". This is regardless of whether or not I run it as root. The flirc_util happily programs the Flirc board, i.e. "flirc_util record up" works and records a key for the "up arrow"-keypress (and this keybinding works afterwards). This is without running flirc_util as root. It gets a bit bothersome to record keys with the flirc_util, so how should I get the GUI to recognize that the Flirc board is connected? My current OS is Ubuntu 16 daily 64bit, and my Flirc board is running firmware 3.8 flashed from Windows. The current x64 linux Flirc GUI and flirc_util is 1.3.6 (we need the newer version, please, http://forum.flirc.tv/index.php?/topic/2200-latest-firmware-on-ubuntu-x64/). I've seen this post about udev rules http://forum.flirc.tv/index.php?/topic/579-warningcannot-open-usb-device-on-linux/ , but with this version (1.3.6) there is already /etc/udev/rules.d/99-flirc.rules in place which contains the rules outlined in that post... Any suggestions?
Several problems with GUI 1.2.2
dugauthier posted a topic in Firmware BugsHello, I have a few problems with my FLIRC, using the GUI 1.2.2 on Win 7 x86_64: Whenever I start the GUI, I see "Disconnected" in the status. If I unplug and replug the FLIRC in a USB port that was not used in the past for it, the driver installs and it get recognized by the GUI. When recognized, I can (could, since I used all my USB ports in the meantime...) define key mapping using the GUI. I tried to update the firmware using the "Advanced>Force FW Update" menu, but this caused the GUI to hang each time (after it discovered a new version and I clicked to proceed). Even if the GUI does not recognize the FLIRC, it appears in the Device manager Zadig indicates the correct driver for FLIRC (interface 1): libusbK v126.96.36.199 The GUI indicates firmware v-16.-16 when I manage to get it to work. I already tried several installations of the GUI (including older versions) as well as uninstalling the device in Device Manager but to no avail. Any clue on how I could upgrade the FW and get the GUI to work in a more predictable way? Thanks in advance for your help. I can do some more research/debug if needed.