Thanks for the reply. I've tried the advice that you gave me and I've not had much success.
Just for information. I have a Flirc-USB in my Shield and another in the NUC which is running Windows 11 primarily for Kodi.
What I have tried
Shield
Device Installed - Flirc - Shield 2nd Gen then loaded USB with 2nd Gen Controller Keys. I also tried Kodi Controller on USB
Device Installed - Set top box - Nvidia - Shield Android TV with 2nd Gen Controller Keys. I also tried Kodi Controller on USB
Device Installed - Home Automation - Random brand & model then loaded Kodi controller keys
I have put the Flirc USBs into both devices after setting up on the Skip software without selecting any controllers but neither unit responded
I also found another post where a similar problem had been solved using Advanced settings and removing profiles so I tried that but without any noticeable difference.
Where I am now - I have the NUC & Shield set as Flirc Devices, the NUC as Kodi and the Shield as Shield 2nd Gen. This seems to have stopped the Shield affecting the NUC but the NUC is still affecting the Shield. It is as though each key press in Kodi on the NUC is replicated on the Shield. If I do some navigation & press enter a few times on the NUC then switch to the Shield Ih ve seen that Netflix has launched and is playing, I have seen menus drilled down into. I'm sure you get the picture
Is there anything else you can think of?
Thanks for your help so far
