Alex Scotti Posted October 30, 2024 Report Posted October 30, 2024 (edited) NEVERMIND. sorry. this does actually appear to be real ir noise. When I cover the thing fully with my hand it stops. Sorry for the bad report. Trying to set up a new flirc. Plugged into my Mac. Attempts to record keys all fail as the key gets "pressed" for me immediately. When I turn on "enable ir recording" I see s steady stream of events coming in. The device is not sitting on a table with me, there's no logical way it's actually getting all this ir. I put it under a box, and it still sees the same events. Wed Oct 30 2024 12:02:22 Flirc GUI Version v3.27.16 Operating System: Mac OSX -50000 +117 -30000 +125 -2558 +101 -12494 +125 -17000 +116 -12479 +127 -3883 +21 -1448 +126 -13585 +128 -18000 +73 -12519 +126 -3888 +99 -36000 +115 -18000 +125 -10957 +152 -3858 +154 -33000 +56 -115 +24 -13694 +153 -2531 +109 -1331 +151 -17000 +126 -12440 +153 -3861 +102 -31000 +123 -1136 +166 -1215 +23 -13876 +154 -17000 +154 -12441 +153 -3858 +98 -16000 +122 -12476 +156 -1129 +166 -2523 +127 -15000 +153 -1230 +101 -102 +129 -17000 +71 -1395 +127 -13600 +92 -1284 +59 -21000 +112 -1335 +101 -1408 +99 -13544 +102 -13800 +77 -2599 +59 -1395 +128 -29000 +113 -3897 +111 -12490 +126 -3884 +74 -16000 +126 -12477 +116 -3894 +128 -28000 +117 -3893 +25 -12576 +76 -3935 +99 -12500 +128 -3885 +181 -17000 +115 -12483 +72 -3942 +73 -2892 +74 -13571 +58 -49000 +57 -30000 +96 -3912 +101 -13825 +128 -46000 +150 -3888 +103 -13793 +128 -16000 +126 -12470 +115 -3898 +102 -1338 +73 -49000 +126 -16000 +125 -13804 +71 -4079 +126 -102 +127 -10707 +98 -3936 +154 -13769 +152 -2562 +20 -67000 +125 -12473 +126 -2478 +102 -102 +156 -18000 +154 -2527 +56 -12538 +78 -5441 +101 -33000 +70 -12497 +158 -3855 +111 -16000 +97 -2892 +101 -12110 +65 -1303 +99 -17000 +113 -2855 +125 -9465 +99 -3913 +102 -46000 +155 -3881 +101 -13802 +158 -2517 +114 -12483 +121 -3893 +102 -83000 +126 -12466 +151 -3888 +101 -50000 +113 -17000 +149 -2791 +101 -13538 +114 -12484 +152 -2448 +118 -16000 +126 -12468 +152 -5367 +114 -48000 +125 -21000 +98 -2864 +126 -13520 +127 -21000 +123 -2836 +151 -13496 +25 -15000 +127 -13862 +159 -3852 +114 -89 +129 -33000 +115 -13845 +152 -2526 +150 -37000 +72 -50000 +71 -50000 +153 -12443 +152 -3859 +180 -102 +152 Edited October 30, 2024 by Alex Scotti Quote
Alex Scotti Posted October 30, 2024 Author Report Posted October 30, 2024 I see this now after i chose "load embedded firmware" - it says 'firmware successfully upgraded." problem still happening, non stop ir events. Wed Oct 30 2024 12:10:30 Flirc GUI Version v3.27.16 Operating System: Mac OSX *** Device Disconnected *** *** Device Connected *** Firmware Version: v4.10.5 SKU: Flirc 2.0 [dori] Git Hash: 0xf7261c8c ERROR. Firmware upgrade required. (fw >= 4.1.0) *** Device Connected *** <1>malloc_addblock(49): Heap Block: 0x20001CD0 - 0x20003BFF (7k) <3>hashtable_ready(270): RB table CRC Mismatch: 0x32EF6B1C != 0xFFFFFFFF <3>iospirit_eep_init(313): hashtable broken, formatting Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.