[Using FLIRC SE for power on/off in custom PC build]

Hi,

I have a similar issue with my Flirc SE. Everything works fine, except the SE power button. SW2 connected to mobo, SW1 to the button (I also tried every other combination and orientation possible just to be sure).

I have used the command line util to record power, and the command line settings output:

C:\Program Files (x86)\Flirc>flirc_util.exe settings
Warning: cannot open USB deviceflirc_util version v1.3.6 [v1.3.6+]
  Firmware: v3.6 [0D58725B]

Settings:
  sleep detection:  Enabled
  noise canceler:   Disabled
  inter-key delay:  3
  seq. modifiers:   Enabled
  state:            0
  builtin profiles: Enable

Memory Info:
  keys recorded:  4
  keys remaining: 165
  memory used:    2%

Recorded Keys:
Index  hash        key
-----  ---------   ---
    0  5BF0BB99    e
    1  F0328421    escape
    2  F8D231ED    b
    3  B07818C0    power

 

Note the warning "cannot open USB device", but everything else works fine. The GUI doesn't show this warning, using Windows 10. Unfortunately I don't have a previous windows system available to test with.

I measured the usb voltage in S5, which is 5 volt. But in this firmware 3.6 I've read the button should also work when the system is running, and it's not working here either. Passthrough of physical button is fine. Please help :)

I erased the power assignment, and relearned it via another remote (not the harmony that had the same button assigned), and now it works. According to the command line output the button hash is now 86EFADD5, and for some reason the harmony remote also works. Learning flirc via harmony is not reliable, so use another remote if possible to learn events.

[Using FLIRC SE for power on/off in custom PC build]

Hi,

I have a similar issue with my Flirc SE. Everything works fine, except the SE power button. SW2 connected to mobo, SW1 to the button (I also tried every other combination and orientation possible just to be sure).

I have used the command line util to record power, and the command line settings output:

C:\Program Files (x86)\Flirc>flirc_util.exe settings
Warning: cannot open USB deviceflirc_util version v1.3.6 [v1.3.6+]
  Firmware: v3.6 [0D58725B]

Settings:
  sleep detection:  Enabled
  noise canceler:   Disabled
  inter-key delay:  3
  seq. modifiers:   Enabled
  state:            0
  builtin profiles: Enable

Memory Info:
  keys recorded:  4
  keys remaining: 165
  memory used:    2%

Recorded Keys:
Index  hash        key
-----  ---------   ---
    0  5BF0BB99    e
    1  F0328421    escape
    2  F8D231ED    b
    3  B07818C0    power

 

Note the warning "cannot open USB device", but everything else works fine. The GUI doesn't show this warning, using Windows 10. Unfortunately I don't have a previous windows system available to test with.

I measured the usb voltage in S5, which is 5 volt. But in this firmware 3.6 I've read the button should also work when the system is running, and it's not working here either. Passthrough of physical button is fine. Please help :)