TVAddict
-
Posts
6 -
Joined
-
Last visited
Posts posted by TVAddict
-
-
Does anybody have long press commands (select, forward) working with any remote? I can't seem to get it working. With HBO app, long press left and right appears to be the only way to rewind/forward. With regular keypress you only advance by 1 sec. Needless to say, it makes my IR remote unusable and I have to fall back to original remote.
-
Unfortunately, no. When you go by code number, it just pulls up command set but not device/manufacturer. And to find it you need to click through every available manufacturer and model. They're not organized or sorted. Sorry.
-
Here you go. This is from URC AUX 001 code set, which was suggested as working in another URC related thread. Thanks for you help, guys.
:e:20324
0,8960,4370,598,466,571,467,575,462,576,462,576,462,576,460,576,462,576,462,574,462,573,463,580,455,576,462,576,1574,602,462,575,1570,602,462,576,1574,597,1575,599,460,576,460,575,1574,598,1574,597,462,576,462,575
:e:60
:e:96:e:97
:e:96
:e:97
:e:96
:e:97
:e:96
:e:97
:e:97
:e:97
:e:97
:e:97
:e:97
:e:97
:e:97
:e:97
:e:97
:e:12481
0,8957,4369,598,466,576,462,575,462,576,462,575,462,576,462,576,462,575,462,602,436,602,436,601,436,576,462,602,1548,597,462,576,1574,602,462,601,1544,601,462,576,462,601,1548,602,1569,597,1574,602,462,575,462,576
:e:60
:e:96
:e:97
:e:96
:e:97
:e:96
:e:97
:e:96
:e:97
:e:96
:e:97
:e:96
:e:97
:e:96 -
As you have no doubt suspected, it was only sending repeat command on repeat keypress. It turns out in URC it's a function of code set rather than remote itself.
Found a code set that doesn't do it and it works now. Thanks. It would be nice if firmware natively support repeat command but I can see how that could be different for selected code set and isn't easily done on your side.
For the record, used AUX 689 if anybody's having same issue.
-
I have URC remote that's configured to keep sending commands while the button is pressed. I can see signal getting transmitted. And, similar config works with all my other devices - receiver, tivo, etc.
It doesn't work for Flirc. I have both, old and new, configured to Nvidia Shield and Fire TV. Both only react one time and not repeating.
I've tried 2 different code sets on URC - AUX 001 and, I think, 022. Neither will repeat.
Any ideas? BTW, new model doesn't have inter-key delay in firmware.
Adding support for Nvidia Shield TV
in General Questions
Posted · Edited by TVAddict
Did you do anything special or it "just works"? What actual IR remote are you using? I have URC and have it configured to continuously send IR while pressed. Not sure what else to do.
Update: Nevermind, particular IR code set I was using didn't sent repeated command as repeat but rather just repeated full command. Changed IR set and it's working now. Too many moving pieces.