Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 1 minute ago, Chizad said: After multiple rounds of unplugging and replugging in FLIRC, and closing out and reopening the software, it looks like the automatic firmware update worked. The FLIRC commands, still do not. Eh...disregard this. I tried to manually upgrade, still got the same error. Closed out and back in the FLIRC software and still getting automatic upgrade attempts that fail. Will update the .ini now. Quote Link to comment Share on other sites More sharing options...
PeterHomoki Posted December 20, 2019 Report Share Posted December 20, 2019 Dear jason, thank you for the quick help! I had the same problem, same Windows & Harmony 650, w/ dori SKU. It now works with the files you have published, thank you for that! [sighs relief] Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 It won't let me copy or save the log to a file. All those options are grayed out. But it doesn't say much. Just that it's GUI version 3.25.0, Windows OS, ***Device Disconnected*** ***Device Connected*** Firmware Version:4.9.0 SKU: Flirc 2.0 [dori] Git Hash 0x5bc57f10 ERROR. Firmware upgrade required. (fw >=4.1.0) ***Device Disconnected*** Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 Hi @jason Thank you for your support. The update to 4.9.1 with the dori file went trough without a issue. Loaded my config afterwards. But still no reaction from the FLIRC when it's connected to my Sunrise TV UHD. Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 11 minutes ago, PeterHomoki said: Dear jason, thank you for the quick help! I had the same problem, same Windows & Harmony 650, w/ dori SKU. It now works with the files you have published, thank you for that! [sighs relief] Well dang! What am I doing wrong? Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 3 minutes ago, Chizad said: Well dang! What am I doing wrong? Are you guys on Nemo? I'm on Dori. Quote Link to comment Share on other sites More sharing options...
jason Posted December 20, 2019 Report Share Posted December 20, 2019 2 minutes ago, Chizad said: Are you guys on Nemo? I'm on Dori. If you did the flirc.ini changes, a flirc.log file should have been created and put on your desktop, do you see that? Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 11 minutes ago, jason said: If you did the flirc.ini changes, a flirc.log file should have been created and put on your desktop, do you see that? Sorry, I didn't know to look for it. Now that I do, it's too large to upload or even to paste here. Any suggestions? Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 Hi @jason I did the whole procedure again and made the log for you. Still not solved for me flirc_log.zip Quote Link to comment Share on other sites More sharing options...
jason Posted December 20, 2019 Report Share Posted December 20, 2019 4 minutes ago, AcIvI said: Hi @jason I did the whole procedure again and made the log for you. Still not solved for me flirc_log.zip 14.1 kB · 0 downloads Did your remote work with the previous firmware? Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 20, 2019 Report Share Posted December 20, 2019 10 minutes ago, Chizad said: Sorry, I didn't know to look for it. Now that I do, it's too large to upload or even to paste here. Any suggestions? Zipped it up. flirc_log.zip Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 (edited) 4 minutes ago, jason said: Did your remote work with the previous firmware? Yes before today i was using Firmware 4.4.2 with my Harmony Hub. And I have also 2 other Flirc v2 with the same config still on 4.4.2 and both are still functional. I wanted to try a new config for Shield TV and for that i had to install a new config, during this i also updated the firmware to 4.9.0 and since then nothing goes Edited December 20, 2019 by AcIvI added the quote Quote Link to comment Share on other sites More sharing options...
jason Posted December 20, 2019 Report Share Posted December 20, 2019 5 minutes ago, AcIvI said: Yes before today i was using Firmware 4.4.2 with my Harmony Hub. And I have also 2 other Flirc v2 with the same config still on 4.4.2 and both are still functional. I wanted to try a new config for Shield TV and for that i had to install a new config, during this i also updated the firmware to 4.9.0 and since then nothing goes did you re-learn your keys? Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 5 minutes ago, jason said: did you re-learn your keys? I did only reload the configfile. No way to re-learn, because the original remote is Bluetooth. I used the config file that worked before. Quote Link to comment Share on other sites More sharing options...
jason Posted December 20, 2019 Report Share Posted December 20, 2019 14 minutes ago, AcIvI said: I did only reload the configfile. No way to re-learn, because the original remote is Bluetooth. I used the config file that worked before. Wait. Flirc can’t work with Bluetooth, I’m not following? Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 9 minutes ago, jason said: Wait. Flirc can’t work with Bluetooth, I’m not following? The Original remote is BT, but the device works with a IR Dongle, that's the reason why i'm using Flirc. I used this thread for instructions: Quote Link to comment Share on other sites More sharing options...
jason Posted December 20, 2019 Report Share Posted December 20, 2019 7 minutes ago, AcIvI said: The Original remote is BT, but the device works with a IR Dongle, that's the reason why i'm using Flirc. I used this thread for instructions: You can't just re-load the configuration file. Re-learning the keys is necessary because I'm using new USB codes. I've edited your config file. Load this up and try that. Sunrise_Flirc.fcfg Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 20, 2019 Report Share Posted December 20, 2019 1 hour ago, jason said: You can't just re-load the configuration file. Re-learning the keys is necessary because I'm using new USB codes. I've edited your config file. Load this up and try that. Sunrise_Flirc.fcfg 348 B · 0 downloads Thank you. Did not know this detail. Unfortunally it still does not work. Is there a way to downgrade back to 4.42, just to be sure that the Flirc still works? Also if i clear the configuration, do i need a configuration for a shield tv 2017? That would be also a way to test if it still works. Because that is that what i wanted to test before buying another flirc for the shield. Quote Link to comment Share on other sites More sharing options...
jason Posted December 21, 2019 Report Share Posted December 21, 2019 2 hours ago, AcIvI said: Thank you. Did not know this detail. Unfortunally it still does not work. Is there a way to downgrade back to 4.42, just to be sure that the Flirc still works? Also if i clear the configuration, do i need a configuration for a shield tv 2017? That would be also a way to test if it still works. Because that is that what i wanted to test before buying another flirc for the shield. Oh I'm so sorry, I modified the content and forgot to update the CRC. Try the attached. Sunrise_Flirc_updated.fcfg Quote Link to comment Share on other sites More sharing options...
jason Posted December 21, 2019 Report Share Posted December 21, 2019 4 hours ago, Chizad said: Zipped it up. flirc_log.zip 24.33 kB · 2 downloads let's do a team viewer session. Let me know if you are free tomorrow. Quote Link to comment Share on other sites More sharing options...
AcIvI Posted December 21, 2019 Report Share Posted December 21, 2019 5 hours ago, jason said: Oh I'm so sorry, I modified the content and forgot to update the CRC. Try the attached. Sunrise_Flirc_updated.fcfg 348 B · 0 downloads It works! Thank you very much for your help. Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 21, 2019 Report Share Posted December 21, 2019 18 hours ago, Chizad said: Zipped it up. flirc_log.zip 24.33 kB · 3 downloads Were you able to glean anything out of this? I'm still broken on Dori with Windows. Quote Link to comment Share on other sites More sharing options...
jason Posted December 21, 2019 Report Share Posted December 21, 2019 Yeah. Have you tried restarting or using a different USB port? We can do a team viewer session Quote Link to comment Share on other sites More sharing options...
Chizad Posted December 21, 2019 Report Share Posted December 21, 2019 12 minutes ago, jason said: Yeah. Have you tried restarting or using a different USB port? We can do a team viewer session Sorry, I somehow missed your request for a team viewer session, but after seeing your last message, I did reboot and was able to install the new firmware successfully, and I'm good to go! Thanks so much for your help and quick responses! Quote Link to comment Share on other sites More sharing options...
Adri Posted December 21, 2019 Author Report Share Posted December 21, 2019 Hi Jason, I did the software update, and the firmware upgrade. After that, I cleared the configuration of my flirc device and re-programmed some keys. However, the flirc still does not accept any of the commands from my Harmony remote. So, it seems for me the issue is not solved yet. Do you have any ideas left? I suppose a downgrade to the last version before 3.25 would do the job. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.