Jump to content
Flirc Forums

Flirc Disconnected - OSX 10.7.5


ocarrollea

Recommended Posts

I'm having some difficulty in getting FLIRC GUI to recognise the device

 

The FLIRC appears in the usb devices with the following properties

 

flirc:

 

  Product ID: 0x0001

  Vendor ID: 0x20a0

  Version: 1.00

  Speed: Up to 1.5 Mb/sec

  Manufacturer: flirc.tv

  Location ID: 0x1d100000 / 3

  Current Available (mA): 500

  Current Required (mA): 100

 

When the flirc is plugged in the GUI reads Firmware V3.7 in the lower left hand corner above the erase button but the GUI still reads disconnected in the lower right corner.

 

If i remove the Flirc device the Firmware V3.7 text disappears from the GUI and Firmware v-9.-9 appears in the lower left corner instead.

 

 

 

Link to comment
Share on other sites

My own fault actually- was running V1.3.6 of the GUI which wasn't playing nice with the v3.7 on the FLIRC. Updated to V1.3.7 of the gui and all now working as it should. I musn't have dropped the Flirc 1.3.7 GUI into the Applications folder the last time I ran it to update the firmware so was still running V1.3.6...

Link to comment
Share on other sites

My own fault actually- was running V1.3.6 of the GUI which wasn't playing nice with the v3.7 on the FLIRC. Updated to V1.3.7 of the gui and all now working as it should. I musn't have dropped the Flirc 1.3.7 GUI into the Applications folder the last time I ran it to update the firmware so was still running V1.3.6...

Glad you got it working.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...