CarlosL Posted May 3, 2023 Report Share Posted May 3, 2023 Hello, I'm trying to replicate my AC remote using Flirc. I did it a few months ago, but I can't seem to get it back. I captured this log using Flirc GUI: Firmware Version: v4.9.61 SKU: Flirc 2.0 [dori] Git Hash: 0x4b35b711 <3>record_hash(473): hash exists -40481 +8834 -4157 +509 -1534 +510 -494 +509 -493 +507 -495 +508 -1536 +509 -494 +509 -493 +509 -494 +508 -495 +509 -493 +535 -469 +508 -495 +506 -495 +510 -493 +507 -496 +508 -496 +508 -1534 +509 -495 +522 -480 +507 -496 +508 -494 +508 -495 +509 -494 +509 -493 +508 -1534 +509 -494 +508 -495 +507 -495 +508 I'm trying to replicate this command using flirc_util, but I can't get it to work: flirc_util.exe sendir --raw="-40481 +8834 -4157 +509 -1534 +510 -494 +509 -493 +507 -495 +508 -1536 +509 -494 +509 -493 +509 -494 +508 -495 +509 -493 +535 -469 +508 -495 +506 -495 +510 -493 +507 -496 +508 -496 +508 -1534 +509 -495 +522 -480 +507 -496 +508 -494 +508 -495 +509 -494 +509 -493 +508 -1534 +509 -494 +508 -495 +507 -495 +508" [W] lib/libcmds/cmds.c handle_longopt(182): `sendir' doesn not take '--raw' option Error: must specify an option flirc_util.exe sendir --pronto="-40481 +8834 -4157 +509 -1534 +510 -494 +509 -493 +507 -495 +508 -1536 +509 -494 +509 -493 +509 -494 +508 -495 +509 -493 +535 -469 +508 -495 +506 -495 +510 -493 +507 -496 +508 -496 +508 -1534 +509 -495 +522 -480 +507 -496 +508 -494 +508 -495 +509 -494 +509 -493 +508 -1534 +509 -494 +508 -495 +507 -495 +508" Transmitting IR Pattern... (but doesn't work) flirc_util.exe sendir --pronto="0,40481,8834,4157,509,1534,510,494,509,493,507,495,508,1536,509,494,509,493,509,494,508,495,509,493,535,469,508,495,506,495,510,493,507,496,508,496,508,1534,509,495,522,480,507,496,508,494,508,495,509,494,509,493,508,1534,509,494,508,495,507,495,508" [E] lib/libtransport/transport.c _dev_send_cmd(223): Wrong response: 'ir_state' Error getting version device disconnected, can't run command ¿Any idea? Thanks! Quote Link to comment Share on other sites More sharing options...
ffwema Posted May 24, 2023 Report Share Posted May 24, 2023 (edited) Try flirc_util.exe sendir --pattern=0,8834,4157,509,1534,510,494,509,493,507,495,508,1536,509,494,509,493,509,494,508,495,509,493,535,469,508,495,506,495,510,493,507,496,508,496,508,1534,509,495,522,480,507,496,508,494,508,495,509,494,509,493,508,1534,509,494,508,495,507,495,508 --repeat=0 Close Flirc GUI before running the command. --raw and --pronto arguments are not available before version 3.26.8. Edited July 31, 2023 by ffwema Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.