MormegilND Posted February 28, 2023 Report Share Posted February 28, 2023 (edited) I have an HP eHome IR Receiver (model OVU400103/00, hardware ID USB\VID_0471&PID_0815&REV_0000) that is not working correctly with the Skip 1s. It detects the correct button presses, but does not detect repeated presses. For instance, pressing the Down navigation button 3 times will only register one Down event, regardless of the length of time between presses. Pressing any other button after the first button will allow the first button to be recognized again. For instance, pressing Down, then Stop, then Down will register a total of 2 Down events. The type of button does not seem to matter - it shows the same behavior with the navigation, media, and numeric buttons. The LED on the eHome receiver does light up on repeated button presses, so an IR signal is being sent, but not recognized. I have tried it with both of the MCE options under the Microsoft device category with the same results. Neither of the XBOX options work at all. Repeated button presses do work properly with the original HP remote and a Harmony 550 using the default Microsoft Windows Media Center profile. Skip App 0.9.6 Firmware 4.12.6 Edited February 28, 2023 by MormegilND Quote Link to comment Share on other sites More sharing options...
Nathan Posted February 28, 2023 Report Share Posted February 28, 2023 This may need a look. MCE /eHome use a different command for the second command, and if that second different command isn't registered, it might not respond. It was an issue back in the day with Flirc USB. I'm going to move this to the supported devices forum for more feedback. Quote Link to comment Share on other sites More sharing options...
jason Posted March 9, 2023 Report Share Posted March 9, 2023 Working on this now, thank you for the detailed info. Quote Link to comment Share on other sites More sharing options...
MormegilND Posted April 10, 2023 Author Report Share Posted April 10, 2023 Any update? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
jason Posted April 10, 2023 Report Share Posted April 10, 2023 Yeah I don’ t have a solution right now as it’s a limitation in the actual code from the database. But will have a workaround Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.