minisplit Posted June 24, 2021 Report Share Posted June 24, 2021 I have a Flirc V2 running on a raspberry pi headless. Using the device log when I press the increase temperature button I get this (I just press the button one time but get what looks like to me to be two outputs): :e:0 371,454,375,454,372,453,372,453,372,423,406,424,405,424,406,484,354,454,375,454,371,454,376,454,371,454,1226,484,353,454,1226,454,371,458,371,454 :e:0 376,454,371,449,380,458,371,429,396,453,372,453,371,450,384,454,371,454,375,454,371,454,371,454,371,424,1264,454,371,454,1230,450,379,454,376,423 I am now trying to use the sendir command like this: flirc_util sendir --pattern="371,454,375,454,372,453,372,453,372,423,406,424,405,424,406,484,354,454,375,454,371,454,376,454,371,454,1226,484,353,454,1226,454,371,458,371,454" --repeat=1 --ik=40000 and I get this error: [E] util/flirc_util/src/cmds/ir_transmit.c sendir(101): Error: buffer should lead with zero But if I add a zero at the beginning like this, I get a different error: flirc_util sendir --pattern="0,371,454,375,454,372,453,372,453,372,423,406,424,405,424,406,484,354,454,375,454,371,454,376,454,371,454,1226,484,353,454,1226,454,371,458,371,454" --repeat=1 --ik=40000 [E] util/flirc_util/src/cmds/ir_transmit.c sendir(96): Error: invalid length, must be even I also tried recording the on/off button with similar results. I noticed the codes are always a little bit different everytime. Do you have any suggestions? Is controlling a minisplit something the Flirc can do? Thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.