Jump to content
Flirc Forums

No S5 Mode whis FlircSE (Intel Mainboard)


MediaCenterOwner

Recommended Posts

Dear Developer,

because I can not found a solution to use my FlircSe receiver to switch on/off  from S5 Mode  and  I can not found a answert in "General Questions". I think it is possible Streacom FlircSE Hardware has problem whis some Hardware.

For my new HTPC I board last week 2 new Mainboard whis Intel Z270 base Chipset.
The Mainboard has SGX (Software Guide Extension) switch on.

When I try to configurate my Flirc SE receiver for switch FlircSE from S5 mode to Switch On, it will not work.

My old Hardware "AMD FM2 "  I had not problem to configurat the S5 Mode.

Whis the new Hardware I have following problem when I will  determine the Power On/Off Button for S5 Mode.

When I open the command interface programm  and start "flirc_util.exe" whis Software" Flirc Software 1.35 RC2"

whis following proceed. I can not configurate the S5 Shutdown and start Function and I got the following "Error"

messages and is does not work:


Example:

------------------------------------------------------------------
 Flirc Version 1.35 RC2, firmware 3,60
------------------------------------------------------------------


Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Windows\system32>cd  C:\Program Files (x86)\flirc

 flirc_util.exe record power


Then I got the following Information from "flirc_util.exe"

Warning: cannot open USB device Press any button on the remote to link it with 'power'


When I now press the "Power Button" on my Remote control "flirc_util.exe" give me the message

  Succesfully recorded button

and the "Power On/ off " funktion will not work :-(

 

-------------------------------------------------------------------------
Flirc Version 2,39/2.60-> Firmware 3,9
--------------------------------------------------------------------------

The problem is Equel:

 

Operation System is:
_____________________

Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Windows\system32>cd  C:\Program Files (x86)\flirc


C:\Program Files (x86)\Flirc>flirc_util.exe record power

[D] lib/libtransport/libusb.c libusb_dev_open(143): can't open usb device
 Press any button on the remote to link it with 'power'

  Succesfully recorded button


My question is now:

- Give it currently problems whis "Intel" based Mainboard whis Z270 Chipsat that not work whis FlircSE Remote controls?

- What is the reason for the Information

Warning: cannot open USB device Press any button on the remote to link it with 'power'


       - >all other Remote function currendly work well

- What can I do to fix the problem?

 

Please help me by this problem. I am not shure what is the problem because on my old HTPC Flirc works fine.

Best regards,

 

 

Fehler-screen-flirc Softwar 239.PNG

Fehler-screen-flirc 135-Rc2.PNG

Hardware.PNG

Hardware2.PNG

Edited Thursday at 04:26 AM by MediaCenterOwner
Link to comment
Share on other sites

Please check if you've connected the power button cables in a correct order. Maybe you've swapped connections to the button and to the motherboard. Flirc SE emulates pressing the power button so there's no reason why wouldn't it work with some hardware.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...