I am running Raspbian Jessie on a RPi 2 and have my Flirc device plugged in. This device works 100% fine under OpenElec as well as RasPlex. I've verified through /var/log/syslog that the device is recognized but I do see the following error: Jul 9 20:21:46 raspberrypi kernel: [ 453.014807] usb 1-1.4: new low-speed USB device number 7 using dwc_otg
Jul 9 20:21:46 raspberrypi kernel: [ 453.129171] usb 1-1.4: New USB device found, idVendor=20a0, idProduct=0001
Jul 9 20:21:46 raspberrypi kernel: [ 453.129201] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jul 9 20:21:46 raspberrypi kernel: [ 453.129217] usb 1-1.4: Product: flirc
Jul 9 20:21:46 raspberrypi kernel: [ 453.129233] usb 1-1.4: Manufacturer: flirc.tv
Jul 9 20:21:46 raspberrypi kernel: [ 453.154323] input: flirc.tv flirc as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:20A0:0001.0004/input/input3
Jul 9 20:21:46 raspberrypi kernel: [ 453.206096] hid-generic 0003:20A0:0001.0004: input,hidraw0: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-3f980000.usb-1.4/input0
Jul 9 20:21:46 raspberrypi mtp-probe: checking bus 1, device 7: "/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4"
Jul 9 20:21:46 raspberrypi mtp-probe: bus: 1, device: 7 was not an MTP device
If I navigate to the Flirc utility directory (../Downloads/release/rpi/flric_util) I am able to successfully verify settings, keys, and versions. I can even delete and record keys through this interface. However, when I push the same keys (programmed a remote key to '0' for testing), nothing happens. I can take the Flirc out of the RPi and plug it right into Windows, and the key press results in '0' on the screen. Any ideas? I've googled all I can and am not finding any solutions. Thanks in advance!