MediaCenterOwner
-
Posts
10 -
Joined
-
Last visited
Posts posted by MediaCenterOwner
-
-
for my new HTPC I Board last week 2 new Mainboard whis Intel Z270 base Chipset.
The Mainboard has SGX (Software Guide Extension) switch on. Whisout SGX I have not tryed becaus I need this Function.When I try to configurate my Flirc SE receiver I will not work.
My old Hardware "AMD FM2 " Hardware I have not problem to configurat the S5 Mode after I know the way.
Whis the new Hardware I have following problem when I will determine the Power On/Off Button for S5 Mode.
When I open the command interface programm and start "flirc_util.exe" whis Software" Flirc Software 1.35 RC2"
whis following proceed. I can not configurate the S5 Shutdown and start Function and I got the following "Error"
messages and is does not work:
Example:------------------------------------------------------------------
Flirc Version 1.35 RC2, firmware 3,60
------------------------------------------------------------------
Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.C:\Windows\system32>cd C:\Program Files (x86)\flirc
flirc_util.exe record power
Then I got the following Information from "flirc_util.exe"Warning: cannot open USB device Press any button on the remote to link it with 'power'
When I now press the "Power Button" on my Remote control "flirc_util.exe" give me the messageSuccesfully recorded button
and the "Power On/ off " funktion will not work :-(
-------------------------------------------------------------------------
Flirc Version 2,39/2.60-> Firmware 3,9
--------------------------------------------------------------------------The problem is Equel:
Operation System is:
_____________________Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.C:\Windows\system32>cd C:\Program Files (x86)\flirc
C:\Program Files (x86)\Flirc>flirc_util.exe record power[D] lib/libtransport/libusb.c libusb_dev_open(143): can't open usb device
Press any button on the remote to link it with 'power'Succesfully recorded button
My question is now:- Give it currently problems whis "Intel" based Mainboard whis Z270 Chipsat that not work whis FlircSE Remote controls?
- What is the reason for the Information
Warning: cannot open USB device Press any button on the remote to link it with 'power'
- >all other Remote function currendly work well- What can I do to fix the problem?
Please help me by this problem. I am not shure what is the problem because on my old HTPC Flirc works fine.
Best regards,
-
Hi Yawor,
yesteday I recovered my other Media Center so that the Media Center have no flirc Software too. The Flirc-SE configuration I does bevor I recovered my Media Center.
Now both Media Center has not installed Flric Software and the Flric-SE works!
Do you know what is the reason that I can not remove the Flirc Software from my Media Center whisout to chance the internal USB Port ore to recover my Media Center?
to your question:
I use Windows 8.1update1 (x64) without changes.
At the Weekend somtetime I thought my Flirc-SE are demage. Fortunaly I had the second flirc-SE so I can try whis the second Flirc Modul. The second "Flirc-SE" modul has the same problem to detect.
-
Thank you for your advice. sometimes its work
At the weekend I had a lot of trouble whis my Flirc-SE Modul.
After I change the internal USB Port. My Media Center do not found the flirc-SE Modul not anymore!
To found the flirc-Modul again I try the following thinks.
- I Boot my Media Center
- I use a other internal USB Port
- I deinstall- and install the latest Flirc software (1.36)
- I recover my Media Center completely (the Image was include: Flirc Software 1.35 RC5)
After all this changes I got an error in "flirc.exe". I try this 6 or 7 Times after all this time the Flirc modul do not work.Then I try a older Flirc Software (1.34) fortunaly the Software found my Flirc Modul again and I can downgrade my Flirc-SE Modul after this I can upgrade the Firmware again to the newest Firmware that I need.
After this I can use the Flirc SE Modul in my second Media Center without the Flirc Software, only the Windows device Manager bring a error that Windows can not found a driver for the Flirc-SE Modul.
The Flirc Modul for my second Media Center I will try later. I hope you can found the problem.
-
Hi,
When I understand the Flirc FAQ (http://www.flirc.tv/faq/) correct. It is passible to use "Flirc-se " Modul whisout any Software?!
After my "flic SE" modul is configurate now. I uninstall the flirc software.
After deinstallation from the Flirc Software unfortunately the "Flirc SE" modul and the Remote Controll will not work again. When I install the Software again all works again whishout problem.
Please can someone tell me what i do wrong to use the "Flirc SE Modul"
whisout Software
Actually I use Windows 8.1 (x64) + Flirc SE
Thank you for your help.
MediaCenterowner -
Hi yawor,
thank you for your help! Now it s works perfect.
Best regards,
MediaCenter Owner
-
Hello Chris,
thank you very much vor your Work! Yes you are right it was a language barrier.
First i am mix up "control" and "Shift" :-( Yeserday I tryed a lot of combinations because I had forgot thatthe keyboard what I have in flirc is a "english/american" keyboard and it is not a static Keyboard.
Unfortunately I am not thinking over this too that the different between a german and a english keyboard is not
only the swap from "z" and the "y" .
Now it is clear thank you!
best regards,
MediaCenter Owner- 1
-
Hi,
I would like programming two button whis the command - (minus) and + (plus)
Today I try to make this command whis the flirc software V. 1.35 and the "Full Keyboard"
To generate the command I try the following:
create "Minus" in Flirc:
---------------------------
Control + Button after the 0 (Zero) Button in the first line from the Flirc "full Keyboard".
create "Minus" in Flirc:
---------------------------
Control + Button after the 0 (Zero) Button in the first line from the Flirc "full Keyboard".
Now my question is it this right or wrong?
I ask this because "flirc v.135" will told me I store the following command.
-(minus) = lcontrol + dash
+(plus) = lcontrol + equals
Thank you for your help and sorry for this question.
cu,
MediaCenter Owner
-
Hello Yewor,
thank you for your help. Today I install "Flirc V.1.35 " and try to activate the "Power Key" Function. After the installation the Firmware is 3.6
Unvortunaly it doesn`t work.I think I do something wrong.
Mybe you can tell me what I do wrong. For use the commandline programm "flirc_util.exe"I use the "Hot To" from here:
and then I try the following steps:
- I open a comandline
- I open the install folder from flirc:
C:\Program Files (x86)\flirc
- Than I follow the "Hot to"
"Then record the wake command flirc_util record wake and press the button on your remote you want."
I try :
flirc_util record Power --> and press the Button on my remote
- "To make the flirc able to wake the computer "
I type in the commandline:
flirc_util Shutdown /s
Best regards,
MediaCenter Owner -
Hi
Whis the newest flirc configurationsoftware (1.34) now the Energy function S3 und S4 (save the operation System to HDD) works fine.
Still I don `t find a configuration to force the Mediacenter to completly shot down.
How can I find this or when I can calculat whis this?
I think the function importent to periodically Shutdown the MediaCenter whis the remote and
shotdown the MediaCenter after a programm crash.
In my first Streacom Media Center whis "IRRC Modul" it is possible without problems.
I'm on Windows 8.1 (x64), firmware 3.5
best regards,
MediaCenterOwner
No S5 Mode whis FlircSE (Intel Mainboard)
in Firmware Bugs
Posted
Dear Developer,
because I can not found a solution to use my FlircSe receiver to switch on/off from S5 Mode and I can not found a answert in "General Questions". I think it is possible Streacom FlircSE Hardware has problem whis some Hardware.
For my new HTPC I board last week 2 new Mainboard whis Intel Z270 base Chipset.
The Mainboard has SGX (Software Guide Extension) switch on.
When I try to configurate my Flirc SE receiver for switch FlircSE from S5 mode to Switch On, it will not work.
My old Hardware "AMD FM2 " I had not problem to configurat the S5 Mode.
Whis the new Hardware I have following problem when I will determine the Power On/Off Button for S5 Mode.
When I open the command interface programm and start "flirc_util.exe" whis Software" Flirc Software 1.35 RC2"
whis following proceed. I can not configurate the S5 Shutdown and start Function and I got the following "Error"
messages and is does not work:
Example:
------------------------------------------------------------------
Flirc Version 1.35 RC2, firmware 3,60
------------------------------------------------------------------
Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.
C:\Windows\system32>cd C:\Program Files (x86)\flirc
flirc_util.exe record power
Then I got the following Information from "flirc_util.exe"
Warning: cannot open USB device Press any button on the remote to link it with 'power'
When I now press the "Power Button" on my Remote control "flirc_util.exe" give me the message
Succesfully recorded button
and the "Power On/ off " funktion will not work :-(
-------------------------------------------------------------------------
Flirc Version 2,39/2.60-> Firmware 3,9
--------------------------------------------------------------------------
The problem is Equel:
Operation System is:
_____________________
Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64
(c) 2017 Microsoft Corporation. Alle Rechte vorbehalten.
C:\Windows\system32>cd C:\Program Files (x86)\flirc
C:\Program Files (x86)\Flirc>flirc_util.exe record power
[D] lib/libtransport/libusb.c libusb_dev_open(143): can't open usb device
Press any button on the remote to link it with 'power'
Succesfully recorded button
My question is now:
- Give it currently problems whis "Intel" based Mainboard whis Z270 Chipsat that not work whis FlircSE Remote controls?
- What is the reason for the Information
Warning: cannot open USB device Press any button on the remote to link it with 'power'
- >all other Remote function currendly work well
- What can I do to fix the problem?
Please help me by this problem. I am not shure what is the problem because on my old HTPC Flirc works fine.
Best regards,