Jump to content
Flirc Forums

MediaCenterOwner

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by MediaCenterOwner

  1. Dear Developer, because I can not found a solution to use my FlircSe receiver to switch on/off from S5 Mode and I can not found a answert in "General Questions". I think it is possible Streacom FlircSE Hardware has problem whis some Hardware. For my new HTPC I board last week 2 new Mainboard whis Intel Z270 base Chipset. The Mainboard has SGX (Software Guide Extension) switch on. When I try to configurate my Flirc SE receiver for switch FlircSE from S5 mode to Switch On, it will not work. My old Hardware "AMD FM2 " I had not problem to configurat the S5 Mode. Whis the new Hardware I have following problem when I will determine the Power On/Off Button for S5 Mode. When I open the command interface programm and start "flirc_util.exe" whis Software" Flirc Software 1.35 RC2" whis following proceed. I can not configurate the S5 Shutdown and start Function and I got the following "Error" messages and is does not work: Example: ------------------------------------------------------------------ Flirc Version 1.35 RC2, firmware 3,60 ------------------------------------------------------------------ Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64 (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Windows\system32>cd C:\Program Files (x86)\flirc flirc_util.exe record power Then I got the following Information from "flirc_util.exe" Warning: cannot open USB device Press any button on the remote to link it with 'power' When I now press the "Power Button" on my Remote control "flirc_util.exe" give me the message Succesfully recorded button and the "Power On/ off " funktion will not work :-( ------------------------------------------------------------------------- Flirc Version 2,39/2.60-> Firmware 3,9 -------------------------------------------------------------------------- The problem is Equel: Operation System is: _____________________ Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64 (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Windows\system32>cd C:\Program Files (x86)\flirc C:\Program Files (x86)\Flirc>flirc_util.exe record power [D] lib/libtransport/libusb.c libusb_dev_open(143): can't open usb device Press any button on the remote to link it with 'power' Succesfully recorded button My question is now: - Give it currently problems whis "Intel" based Mainboard whis Z270 Chipsat that not work whis FlircSE Remote controls? - What is the reason for the Information Warning: cannot open USB device Press any button on the remote to link it with 'power' - >all other Remote function currendly work well - What can I do to fix the problem? Please help me by this problem. I am not shure what is the problem because on my old HTPC Flirc works fine. Best regards, Edited Thursday at 04:26 AM by MediaCenterOwner
  2. for my new HTPC I Board last week 2 new Mainboard whis Intel Z270 base Chipset. The Mainboard has SGX (Software Guide Extension) switch on. Whisout SGX I have not tryed becaus I need this Function. When I try to configurate my Flirc SE receiver I will not work. My old Hardware "AMD FM2 " Hardware I have not problem to configurat the S5 Mode after I know the way. Whis the new Hardware I have following problem when I will determine the Power On/Off Button for S5 Mode. When I open the command interface programm and start "flirc_util.exe" whis Software" Flirc Software 1.35 RC2" whis following proceed. I can not configurate the S5 Shutdown and start Function and I got the following "Error" messages and is does not work: Example: ------------------------------------------------------------------ Flirc Version 1.35 RC2, firmware 3,60 ------------------------------------------------------------------ Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64 (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Windows\system32>cd C:\Program Files (x86)\flirc flirc_util.exe record power Then I got the following Information from "flirc_util.exe" Warning: cannot open USB device Press any button on the remote to link it with 'power' When I now press the "Power Button" on my Remote control "flirc_util.exe" give me the message Succesfully recorded button and the "Power On/ off " funktion will not work :-( ------------------------------------------------------------------------- Flirc Version 2,39/2.60-> Firmware 3,9 -------------------------------------------------------------------------- The problem is Equel: Operation System is: _____________________ Microsoft Windows [Version 10.0.15063.250] -----------------------------------------------> Home Version x64 (c) 2017 Microsoft Corporation. Alle Rechte vorbehalten. C:\Windows\system32>cd C:\Program Files (x86)\flirc C:\Program Files (x86)\Flirc>flirc_util.exe record power [D] lib/libtransport/libusb.c libusb_dev_open(143): can't open usb device Press any button on the remote to link it with 'power' Succesfully recorded button My question is now: - Give it currently problems whis "Intel" based Mainboard whis Z270 Chipsat that not work whis FlircSE Remote controls? - What is the reason for the Information Warning: cannot open USB device Press any button on the remote to link it with 'power' - >all other Remote function currendly work well - What can I do to fix the problem? Please help me by this problem. I am not shure what is the problem because on my old HTPC Flirc works fine. Best regards,
  3. Hi Yawor, yesteday I recovered my other Media Center so that the Media Center have no flirc Software too. The Flirc-SE configuration I does bevor I recovered my Media Center. Now both Media Center has not installed Flric Software and the Flric-SE works! Do you know what is the reason that I can not remove the Flirc Software from my Media Center whisout to chance the internal USB Port ore to recover my Media Center? to your question: I use Windows 8.1update1 (x64) without changes. At the Weekend somtetime I thought my Flirc-SE are demage. Fortunaly I had the second flirc-SE so I can try whis the second Flirc Modul. The second "Flirc-SE" modul has the same problem to detect.
  4. Thank you for your advice. sometimes its work At the weekend I had a lot of trouble whis my Flirc-SE Modul. After I change the internal USB Port. My Media Center do not found the flirc-SE Modul not anymore! To found the flirc-Modul again I try the following thinks. - I Boot my Media Center - I use a other internal USB Port - I deinstall- and install the latest Flirc software (1.36) - I recover my Media Center completely (the Image was include: Flirc Software 1.35 RC5) After all this changes I got an error in "flirc.exe". I try this 6 or 7 Times after all this time the Flirc modul do not work. Then I try a older Flirc Software (1.34) fortunaly the Software found my Flirc Modul again and I can downgrade my Flirc-SE Modul after this I can upgrade the Firmware again to the newest Firmware that I need. After this I can use the Flirc SE Modul in my second Media Center without the Flirc Software, only the Windows device Manager bring a error that Windows can not found a driver for the Flirc-SE Modul. The Flirc Modul for my second Media Center I will try later. I hope you can found the problem.
  5. Hi, When I understand the Flirc FAQ (http://www.flirc.tv/faq/) correct. It is passible to use "Flirc-se " Modul whisout any Software?! After my "flic SE" modul is configurate now. I uninstall the flirc software. After deinstallation from the Flirc Software unfortunately the "Flirc SE" modul and the Remote Controll will not work again. When I install the Software again all works again whishout problem. Please can someone tell me what i do wrong to use the "Flirc SE Modul" whisout Software Actually I use Windows 8.1 (x64) + Flirc SE Thank you for your help. MediaCenterowner
  6. Hi yawor, thank you for your help! Now it s works perfect. Best regards, MediaCenter Owner
  7. Hello Chris, thank you very much vor your Work! Yes you are right it was a language barrier. First i am mix up "control" and "Shift" :-( Yeserday I tryed a lot of combinations because I had forgot that the keyboard what I have in flirc is a "english/american" keyboard and it is not a static Keyboard. Unfortunately I am not thinking over this too that the different between a german and a english keyboard is not only the swap from "z" and the "y" . Now it is clear thank you! best regards, MediaCenter Owner
  8. Hi, I would like programming two button whis the command - (minus) and + (plus) Today I try to make this command whis the flirc software V. 1.35 and the "Full Keyboard" To generate the command I try the following: create "Minus" in Flirc: --------------------------- Control + Button after the 0 (Zero) Button in the first line from the Flirc "full Keyboard". create "Minus" in Flirc: --------------------------- Control + Button after the 0 (Zero) Button in the first line from the Flirc "full Keyboard". Now my question is it this right or wrong? I ask this because "flirc v.135" will told me I store the following command. -(minus) = lcontrol + dash +(plus) = lcontrol + equals Thank you for your help and sorry for this question. cu, MediaCenter Owner
  9. Hello Yewor, thank you for your help. Today I install "Flirc V.1.35 " and try to activate the "Power Key" Function. After the installation the Firmware is 3.6 Unvortunaly it doesn`t work. I think I do something wrong. Mybe you can tell me what I do wrong. For use the commandline programm "flirc_util.exe" I use the "Hot To" from here: and then I try the following steps: - I open a comandline - I open the install folder from flirc: C:\Program Files (x86)\flirc - Than I follow the "Hot to" "Then record the wake command flirc_util record wake and press the button on your remote you want." I try : flirc_util record Power --> and press the Button on my remote - "To make the flirc able to wake the computer " I type in the commandline: flirc_util Shutdown /s Best regards, MediaCenter Owner
  10. Hi Whis the newest flirc configurationsoftware (1.34) now the Energy function S3 und S4 (save the operation System to HDD) works fine. Still I don `t find a configuration to force the Mediacenter to completly shot down. How can I find this or when I can calculat whis this? I think the function importent to periodically Shutdown the MediaCenter whis the remote and shotdown the MediaCenter after a programm crash. In my first Streacom Media Center whis "IRRC Modul" it is possible without problems. I'm on Windows 8.1 (x64), firmware 3.5 best regards, MediaCenterOwner
×
×
  • Create New...