jason
-
Posts
3,730 -
Joined
-
Last visited
-
Days Won
228
Posts posted by jason
-
-
19 hours ago, gdenicolas said:
it didn't work. I switch from "power on" to "power toggle" , for the Pioneer vsx-1021 receiver, and it worked.
Thanks for your support.
You are on the latest now? What is the firmware version now?
-
On 4/11/2024 at 7:16 PM, DisplayName said:
I don't really know what you mean by virtual environment, like a Linux VM or what exactly?
Other than that I've tried about everything. But since after my post other people have mentioned issues and the creator responded to it, I'll wait for what the solution might do before I try anything else.
The last thing I want is to send this back, but as just an average user who has more than enough tech troubles in his own area (digital art), I'm only willing to go this far before its no longer worth the effort.
Temporary work around, will become a lot more elegant and invisible later. We're going to fix it, I'm done with microsoft's bullshit. It's their fault.
Continue discussion there.
-
Smart activity switching is coming. Unfortunately, learning took a long time, and we are about done and ready to push.
We hit a roadblock (unrelated) with a huge effort we were working on over the past 5 weeks, we'll be back on this soon. -
Long overdue, but I have a temporary solution there that will become more elegant and invisible overtime.
Continue the discussion over there. -
Okay, firmware is most likely the issue. Remove the batteries. Press the center key and the back key at the same time while plugging in the USB. You should see the lights blink red if you press any button, if not, didn't work. Launch the app, it will upgrade the firmware. If not, let me know.
-
Is no news good news?
-
11 minutes ago, gdenicolas said:
Lights turn on after disconnected. Maybe with a little bit lower brightness. I have tried with two different pairs of new batteries.
Nah, not the batteries then. Can you save your configuration file and post it here. Can you also tell me what firmware version you have on your remote?
-
18 minutes ago, gdenicolas said:
When I am programming Skip, I test actions (specifically power on a Pioneer vsx1021 receiver), and works great, but when I disconnect Skip from my Mac, Skip couldn't turn on or off the pioneer receiver.
I tried with new batteries, and same results.
This is a new one. Do the lights turn on when disconnected from the computer? Like in the profile buttons and the color ring?
-
No, something went wrong. You were pressing the button, and it looked fine, and then all of a sudden the length of numbers reported increased.
If I'm to believe the first press, than I see nothing wrong with the code. Can you try to re-learn again? Once done, save and post your configuration file. -
First button looks fine. Second button, not sure what the hell is going on with that one. Can you share a pic of the remote, which buttons were which?
-
Thanks for letting me know it was working and thank you even more for the patience and support. I will not only document and pin this, I will improve on it. I don’t know if Microsoft will ever fix the issue so the goal will be to talk to the remote through an outside app and you skipapp wont know the difference. It’ll take a bit of time but it’s doable.
-
1 hour ago, dodusman said:
I tried.
It's not working properly. Sometimes pressing increases the volume, then it no longer works.
For the "mute" button you have to press at least 10 times...
In the Settings (3 dots at the bottom right), go to accessibility, enable admin panel.
upper right corner, hit the wrench. Go to the last tab called learning.
Press and hold a button there. Copy both the windows and paste them here.
-
23 hours ago, dodusman said:
Good morning
Can you explain to me how to operate my Loewe Klang Bar 3 soundbar?
THANKS
you can try learning it with the current beta version:
-
Downloads:
SkipApp Tool
SkipUpdate for Config FilesDescription:
Thanks for your patience, this was a lot of work. You'll need special versions of software for now. But here is a summary of what you do. Use our app as you would. When you are ready to 'sync', you'll export your configuration with a special process.
- Enable special export by pressing 'tab' 3 times while in the tools tab
- Click Export Remote Configuration
- Save to Disk
- Open up skipUpdate Tool and load the saved config
- Sync
Here is a video demo and a link if the embedded video doesn't play.
-
1
-
2 hours ago, GreyFoxRTX said:
Thanks, not that it helped make the Remote work but always nice to know.
I understand you are frustrated. I have an idea that will be easier to implement but not as elegant. Basically, I'll make this a two step process.
-
I'll add the ability to export the binary config that gets downloaded to the remote. This will export into a file.
- Step two will be to launch another program that will be able to upgrade the remote, as well as load this file. That is all.
- This will evolve into an app that SkipApp talks to. Basically, it will launch alongside SkipApp and handle the device communication when this situation happens. It will take a bit longer to implement this, and iterate on this elegantly. But will be our goal.
Please be patient, it's just me and one other developer at the moment. I'll try and have something for you this week. I'm really sorry for this frustrating inconvenience.
-
I'll add the ability to export the binary config that gets downloaded to the remote. This will export into a file.
-
19 minutes ago, GreyFoxRTX said:
So there is nothing I can do to use this remote until this fix?
I’m at a loss. Windows forces us to use a framework and then permits other developers to lock us out of our own device.
we issued a fix and it asks you for permission and a password and it is supposed to reverse their registry modification. That has seemed to work for 75% of people. Were you prompted for a password? You can try right clicking the app and running as administrator.
now that it doesn’t work for you I don’t know what the hell to do. The fact that our other software works proves the point that windows fucks us because they force us to use their dumb sandbox.
so I have to write a client that our app talks to which talks to the remote. I don’t know what else to do. I’ve spent hundreds of hours on this dumb problem.
-
Thank you. I’ll have a solution this week.
-
4 hours ago, GreyFoxRTX said:
@jason I see you post a lot telling people to DM you for answers, but can you just post what to do for people like me who buy this device and can't use it because "reasons"?!
Can you tell me if this works:
are you able to connect to the remote and change the led color?
-
On 4/5/2024 at 5:42 AM, ajmxco said:
@jason - thanks for finding the problem and fixing.
When I click on one of the new download links I get a weird xml error. Is this a me problem?
Try again
-
On 4/3/2024 at 1:50 AM, Aziraphale said:
I do but when you look at the download link you will see that that links to 0.9.957.7232. I can't install any other version from the download link in this topic.
Oh you are right. Are you on the updated firmware?
-
On 4/2/2024 at 2:00 PM, ytsejam1138 said:
@jason Will you be posting the Windows update as well?
my mistake, my build script got stuck. Should be posted.
-
1
-
-
I posted an update 4.10.5, should fix it.
-
17 hours ago, mechman said:
It's borked, send me a pm.
-
13 hours ago, Aziraphale said:
That's the one I have. I downloaded it from the link in this thread...
You said you had 0.9.957.7232, so it's not the right one. You have to re-install the one from the forum and don't let it update when it prompts you.
Flirc works only when connected to my Mac
in Skip 1s
Posted
Thanks for letting me know it worked, but let me know the firmware version so that I can try to reproduce and get to the bottom of it. Again, thanks for letting me know.